yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-05 19:42:08 +02:00
Code Issues Projects Releases Packages Wiki Activity

Merge remote-tracking branch 'origin' into feature/bmwi3

Browse source
This commit is contained in:
Daniel 2024-02-23 15:11:41 +02:00
commit 25b0a7da65
78 changed files with 10827 additions and 2100 deletions
Download patch file Download diff file Expand all files Collapse all files

10
Software/USER_SETTINGS.h
View file

@ -25,11 +25,12 @@
//#define LUNA2000_MODBUS //Enable this line to emulate a "Luna2000 battery" over Modbus RTU
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
//#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus
//#define SMA_TRIPOWER_CAN //Enable this line to emulate a "SMA Home Storage battery" over CAN bus
//#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
/* Other options */
#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
@ -37,10 +38,10 @@
//#define SERIAL_LINK_RECEIVER //Enable this line to receive battery data over RS485 pins from another Lilygo (This LilyGo interfaces with inverter)
//#define SERIAL_LINK_TRANSMITTER //Enable this line to send battery data over RS485 pins to another Lilygo (This LilyGo interfaces with battery)
#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
#define LOAD_SAVED_SETTINGS_ON_BOOT //Enable this line to read settings stored via the webserver on boot
//#define LOAD_SAVED_SETTINGS_ON_BOOT //Enable this line to read settings stored via the webserver on boot (overrides any battery settings set in USER_SETTINGS.cpp)
/* MQTT options */
//#define MQTT // Enable this line to enable MQTT
// #define MQTT // Enable this line to enable MQTT
#define MQTT_SUBSCRIPTIONS \
{ "my/topic/abc", "my/other/topic" }
#define MQTT_SERVER "192.168.xxx.yyy"
@ -54,12 +55,13 @@
//#define NISSANLEAF_CHARGER //Enable this line to control a Nissan LEAF PDM connected to battery - for example, when generator charging
/* Battery limits: These are set in the USER_SETTINGS.cpp file, or later on via the Webserver */
extern volatile uint16_t BATTERY_WH_MAX;
extern volatile uint32_t BATTERY_WH_MAX;
extern volatile uint16_t MAXPERCENTAGE;
extern volatile uint16_t MINPERCENTAGE;
extern volatile uint16_t MAXCHARGEAMP;
extern volatile uint16_t MAXDISCHARGEAMP;
extern volatile uint8_t AccessPointEnabled;
extern volatile bool USE_SCALED_SOC;
/* Charger limits (Optional): Set in the USER_SETTINGS.cpp or later in the webserver */
extern volatile float charger_setpoint_HV_VDC;