yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-05 02:39:57 +02:00
Code Issues Projects Releases Packages Wiki Activity

Make CAN-FD work with refactor

Browse source
This commit is contained in:
Daniel 2024-08-07 20:51:23 +03:00
parent e92f35e50b
commit 28c4bf1c7f
4 changed files with 23 additions and 34 deletions
Download patch file Download diff file Expand all files Collapse all files

6
Software/USER_SETTINGS.h
View file

@ -14,7 +14,7 @@
//#define IMIEV_CZERO_ION_BATTERY
//#define JAGUAR_IPACE_BATTERY
//#define KIA_HYUNDAI_64_BATTERY
#define KIA_E_GMP_BATTERY
//#define KIA_E_GMP_BATTERY
//#define KIA_HYUNDAI_HYBRID_BATTERY
//#define MG_5_BATTERY
//#define NISSAN_LEAF_BATTERY
@ -43,13 +43,13 @@
//#define HW_STARK
/* Other options */
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
//#define DEBUG_CANFD_DATA //Enable this line to have the USB port output CAN-FD data while program runs (WARNING, raises CPU load, do not use for production)
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for some inverters / double battery)
#define CAN_FD //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2517FD controller (Needed for some batteries)
//#define CAN_FD //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2517FD controller (Needed for some batteries)
//#define SERIAL_LINK_RECEIVER //Enable this line to receive battery data over RS485 pins from another Lilygo (This LilyGo interfaces with inverter)
//#define SERIAL_LINK_TRANSMITTER //Enable this line to send battery data over RS485 pins to another Lilygo (This LilyGo interfaces with battery)
#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.