Introduce CanReceiver and Rs485Receiver

Software/Software.ino

@@ -224,10 +224,9 @@ void core_loop(void*) {
 #endif
 
     // Input, Runs as fast as possible
-    receive_can();  // Receive CAN messages
-#if defined(RS485_INVERTER_SELECTED) || defined(RS485_BATTERY_SELECTED)
-    receive_RS485();  // Process serial2 RS485 interface
-#endif                // RS485_INVERTER_SELECTED
+    receive_can();    // Receive CAN messages
+    receive_rs485();  // Process serial2 RS485 interface
+
     END_TIME_MEASUREMENT_MAX(comm, datalayer.system.status.time_comm_us);
 #ifdef WEBSERVER
     START_TIME_MEASUREMENT(ota);

Software/src/battery/BATTERIES.cpp

@@ -41,21 +41,4 @@ void setup_battery() {
 #endif
 }
 
-// transmit_can_battery is called once and we need to
-// call both batteries.
-
-void handle_incoming_can_frame_battery(CAN_frame rx_frame) {
-  ((CanBattery*)battery)->handle_incoming_can_frame(rx_frame);
-}
-
-void handle_incoming_can_frame_battery2(CAN_frame rx_frame) {
-  ((CanBattery*)battery2)->handle_incoming_can_frame(rx_frame);
-}
-
-#ifdef RS485_BATTERY_SELECTED
-void receive_RS485() {
-  ((RS485Battery*)battery)->receive_RS485();
-}
-#endif
-
 #endif

Software/src/battery/BATTERIES.h

@@ -13,7 +13,6 @@ void setup_can_shunt();
 
 #ifdef BMW_SBOX
 #include "BMW-SBOX.h"
-void handle_incoming_can_frame_shunt(CAN_frame rx_frame);
 #endif
 
 #ifdef BMW_I3_BATTERY
@@ -160,14 +159,4 @@ void handle_incoming_can_frame_shunt(CAN_frame rx_frame);
 
 void setup_battery(void);
 
-#ifdef RS485_BATTERY_SELECTED
-void transmit_rs485(unsigned long currentMillis);
-void receive_RS485();
-#else
-void handle_incoming_can_frame_battery(CAN_frame rx_frame);
-void transmit_can_battery(unsigned long currentMillis);
-#endif
-
-void handle_incoming_can_frame_battery2(CAN_frame rx_frame);
-
 #endif

Software/src/battery/CHADEMO-BATTERY.cpp

@@ -341,6 +341,8 @@ void ChademoBattery::handle_incoming_can_frame(CAN_frame rx_frame) {
   }
 
   handle_chademo_sequence();
+
+  ISA_handleFrame(&rx_frame);
 }
 
 /* (re)initialize evse structures to pre-charge/discharge states */

Software/src/battery/CanBattery.h

@@ -4,10 +4,11 @@
 #include "Battery.h"
 
 #include "src/communication/Transmitter.h"
+#include "src/communication/can/CanReceiver.h"
 #include "src/devboard/utils/types.h"
 
 // Abstract base class for batteries using the CAN bus
-class CanBattery : public Battery, Transmitter {
+class CanBattery : public Battery, Transmitter, CanReceiver {
  public:
   virtual void handle_incoming_can_frame(CAN_frame rx_frame) = 0;
   virtual void transmit_can(unsigned long currentMillis) = 0;
@@ -16,17 +17,21 @@ class CanBattery : public Battery, Transmitter {
 
   void transmit(unsigned long currentMillis) { transmit_can(currentMillis); }
 
+  void receive_can_frame(CAN_frame* frame) { handle_incoming_can_frame(*frame); }
+
  protected:
   CAN_Interface can_interface;
 
   CanBattery() {
     can_interface = can_config.battery;
     register_transmitter(this);
+    register_can_receiver(this, can_interface);
   }
 
   CanBattery(CAN_Interface interface) {
     can_interface = interface;
     register_transmitter(this);
+    register_can_receiver(this, can_interface);
   }
 };
 

Software/src/battery/DALY-BMS.cpp

@@ -178,7 +178,7 @@ void DalyBms::transmit_rs485(unsigned long currentMillis) {
   }
 }
 
-void DalyBms::receive_RS485() {
+void DalyBms::receive() {
   static uint8_t recv_buff[13] = {0};
   static uint8_t recv_len = 0;
 

Software/src/battery/DALY-BMS.h

@@ -23,7 +23,7 @@ class DalyBms : public RS485Battery {
   void setup();
   void update_values();
   void transmit_rs485(unsigned long currentMillis);
-  void receive_RS485();
+  void receive();
 
  private:
   int baud_rate() { return 9600; }

Software/src/battery/RS485Battery.h

@@ -6,17 +6,21 @@
 #include "src/communication/Transmitter.h"
 #include "src/devboard/utils/types.h"
 
+#include "src/communication/rs485/comm_rs485.h"
+
 // Abstract base class for batteries using the RS485 interface
-class RS485Battery : public Battery, Transmitter {
+class RS485Battery : public Battery, Transmitter, Rs485Receiver {
  public:
-  virtual void receive_RS485() = 0;
   virtual void transmit_rs485(unsigned long currentMillis) = 0;
 
   String interface_name() { return "RS485"; }
 
   void transmit(unsigned long currentMillis) { transmit_rs485(currentMillis); }
 
-  RS485Battery() { register_transmitter(this); }
+  RS485Battery() {
+    register_transmitter(this);
+    register_receiver(this);
+  }
 };
 
 #endif

Software/src/battery/Shunt.h

@@ -1,11 +1,11 @@
 #ifndef _SHUNT_H
 #define _SHUNT_H
 
-#include "../communication/can/comm_can.h"
 #include "src/communication/Transmitter.h"
+#include "src/communication/can/CanReceiver.h"
 #include "src/devboard/utils/types.h"
 
-class CanShunt : public Transmitter {
+class CanShunt : public Transmitter, CanReceiver {
  public:
   virtual void setup() = 0;
   virtual void transmit_can(unsigned long currentMillis) = 0;
@@ -17,12 +17,15 @@ class CanShunt : public Transmitter {
     }
   }
 
+  void receive_can_frame(CAN_frame* frame) { handle_incoming_can_frame(*frame); }
+
  protected:
   CAN_Interface can_interface;
 
   CanShunt() {
     can_interface = can_config.battery;
     register_transmitter(this);
+    register_can_receiver(this, can_interface);
   }
 };
 

Software/src/battery/Shunts.cpp

@@ -4,13 +4,7 @@
 CanShunt* shunt = nullptr;
 
 void setup_can_shunt() {
-#if defined(CAN_SHUNT_SELECTED) && defined(SELECTED_SHUNT_CLASS)
+#if defined(SELECTED_SHUNT_CLASS)
   shunt = new SELECTED_SHUNT_CLASS();
 #endif
 }
-
-void handle_incoming_can_frame_shunt(CAN_frame rx_frame) {
-  if (shunt) {
-    shunt->handle_incoming_can_frame(rx_frame);
-  }
-}

Software/src/charger/CanCharger.h

@@ -5,6 +5,7 @@
 
 #include "../datalayer/datalayer.h"
 #include "src/communication/Transmitter.h"
+#include "src/communication/can/CanReceiver.h"
 
 enum class ChargerType { NissanLeaf, ChevyVolt };
 
@@ -37,7 +38,7 @@ class Charger {
 };
 
 // Base class for chargers on a CAN bus
-class CanCharger : public Charger, Transmitter {
+class CanCharger : public Charger, Transmitter, CanReceiver {
  public:
   virtual void map_can_frame_to_variable(CAN_frame rx_frame) = 0;
   virtual void transmit_can(unsigned long currentMillis) = 0;
@@ -48,8 +49,13 @@ class CanCharger : public Charger, Transmitter {
     }
   }
 
+  void receive_can_frame(CAN_frame* frame) { map_can_frame_to_variable(*frame); }
+
  protected:
-  CanCharger(ChargerType type) : Charger(type) { register_transmitter(this); }
+  CanCharger(ChargerType type) : Charger(type) {
+    register_transmitter(this);
+    register_can_receiver(this, can_config.charger);
+  }
 };
 
 #endif

Software/src/communication/can/CanReceiver.h

@@ -0,0 +1,15 @@
+#ifndef _CANRECEIVER_H
+#define _CANRECEIVER_H
+
+#include "src/devboard/utils/types.h"
+#include "src/include.h"
+
+class CanReceiver {
+ public:
+  virtual void receive_can_frame(CAN_frame* rx_frame) = 0;
+};
+
+// Register a receiver object for a given CAN interface
+void register_can_receiver(CanReceiver* receiver, CAN_Interface interface);
+
+#endif

Software/src/communication/can/comm_can.cpp

@@ -1,4 +1,5 @@
 #include "comm_can.h"
+#include <map>
 #include "../../include.h"
 #include "src/devboard/sdcard/sdcard.h"
 
@@ -10,6 +11,8 @@ volatile bool send_ok_2515 = 0;
 volatile bool send_ok_2518 = 0;
 static unsigned long previousMillis10 = 0;
 
+void map_can_frame_to_variable(CAN_frame* rx_frame, CAN_Interface interface);
+
 #ifdef CAN_ADDON
 static const uint32_t QUARTZ_FREQUENCY = CRYSTAL_FREQUENCY_MHZ * 1000000UL;  //MHZ configured in USER_SETTINGS.h
 SPIClass SPI2515;
@@ -273,7 +276,13 @@ void print_can_frame(CAN_frame frame, frameDirection msgDir) {
   }
 }
 
-void map_can_frame_to_variable(CAN_frame* rx_frame, int interface) {
+static std::multimap<CAN_Interface, CanReceiver*> can_receivers;
+
+void register_can_receiver(CanReceiver* receiver, CAN_Interface interface) {
+  can_receivers.insert({interface, receiver});
+}
+
+void map_can_frame_to_variable(CAN_frame* rx_frame, CAN_Interface interface) {
   if (interface !=
       CANFD_NATIVE) {  //Avoid printing twice due to receive_frame_canfd_addon sending to both FD interfaces
     //TODO: This check can be removed later when refactored to use inline functions for logging
@@ -288,31 +297,15 @@ void map_can_frame_to_variable(CAN_frame* rx_frame, int interface) {
   }
 #endif
 
-  if (interface == can_config.battery) {
-#ifndef RS485_BATTERY_SELECTED
-    handle_incoming_can_frame_battery(*rx_frame);
-#endif
-#ifdef CHADEMO_BATTERY
-    ISA_handleFrame(rx_frame);
-#endif
-  }
-  if (interface == can_config.inverter) {
-#ifdef CAN_INVERTER_SELECTED
-    map_can_frame_to_variable_inverter(*rx_frame);
-#endif
-  }
-  if (interface == can_config.battery_double && battery2) {
-    handle_incoming_can_frame_battery2(*rx_frame);
-  }
-  if (interface == can_config.charger && charger) {
-    charger->map_can_frame_to_variable(*rx_frame);
-  }
-  if (interface == can_config.shunt) {
-#ifdef CAN_SHUNT_SELECTED
-    handle_incoming_can_frame_shunt(*rx_frame);
-#endif
+  // Send the frame to all the receivers registered for this interface.
+  auto receivers = can_receivers.equal_range(interface);
+
+  for (auto it = receivers.first; it != receivers.second; ++it) {
+    auto& receiver = it->second;
+    receiver->receive_can_frame(rx_frame);
   }
 }
+
 void dump_can_frame(CAN_frame& frame, frameDirection msgDir) {
   char* message_string = datalayer.system.info.logged_can_messages;
   int offset = datalayer.system.info.logged_can_messages_offset;  // Keeps track of the current position in the buffer

Software/src/communication/can/comm_can.h

@@ -27,16 +27,6 @@ void transmit_can_frame(CAN_frame* tx_frame, int interface);
  */
 void init_CAN();
 
-/**
- * @brief Transmit one CAN frame
- *
- * @param[in] CAN_frame* tx_frame
- * @param[in] int interface
- *
- * @return void
- */
-void transmit_can_frame();
-
 /**
  * @brief Receive CAN messages from all interfaces 
  *
@@ -82,14 +72,4 @@ void receive_frame_canfd_addon();
  */
 void print_can_frame(CAN_frame frame, frameDirection msgDir);
 
-/**
- * @brief Map CAN frame from specified interface to variable
- *
- * @param[in] CAN_frame* rx_frame
- * @param[in] int interface
- *
- * @return void
- */
-void map_can_frame_to_variable(CAN_frame* rx_frame, int interface);
-
 #endif

Software/src/communication/rs485/comm_rs485.cpp

@@ -1,6 +1,8 @@
 #include "comm_rs485.h"
 #include "../../include.h"
 
+#include <list>
+
 void init_rs485() {
 #ifdef RS485_EN_PIN
   pinMode(RS485_EN_PIN, OUTPUT);
@@ -18,3 +20,15 @@ void init_rs485() {
   // Inverters and batteries are expected to initialize their serial port in their setup-function
   // for RS485 or Modbus comms.
 }
+
+static std::list<Rs485Receiver*> receivers;
+
+void receive_rs485() {
+  for (auto& receiver : receivers) {
+    receiver->receive();
+  }
+}
+
+void register_receiver(Rs485Receiver* receiver) {
+  receivers.push_back(receiver);
+}

Software/src/communication/rs485/comm_rs485.h

@@ -1,12 +1,6 @@
 #ifndef _COMM_RS485_H_
 #define _COMM_RS485_H_
 
-#include "../../include.h"
-
-#include "../../lib/eModbus-eModbus/Logging.h"
-#include "../../lib/eModbus-eModbus/ModbusServerRTU.h"
-#include "../../lib/eModbus-eModbus/scripts/mbServerFCs.h"
-
 /**
  * @brief Initialization of RS485
  *
@@ -16,4 +10,17 @@
  */
 void init_rs485();
 
+// Defines an interface for any object that needs to receive a signal to handle RS485 comm.
+// Can be extended later for more complex operation.
+class Rs485Receiver {
+ public:
+  virtual void receive() = 0;
+};
+
+// Forwards the call to all registered RS485 receivers
+void receive_rs485();
+
+// Registers the given object as a receiver.
+void register_receiver(Rs485Receiver* receiver);
+
 #endif

Software/src/devboard/safety/safety.cpp

@@ -212,17 +212,18 @@ void update_machineryprotection() {
     clear_event(EVENT_CAN_CORRUPTED_WARNING);
   }
 
-#ifdef CAN_INVERTER_SELECTED
-  // Check if the inverter is still sending CAN messages. If we go 60s without messages we raise a warning
-  if (!datalayer.system.status.CAN_inverter_still_alive) {
-    set_event(EVENT_CAN_INVERTER_MISSING, can_config.inverter);
-  } else {
-    datalayer.system.status.CAN_inverter_still_alive--;
-    clear_event(EVENT_CAN_INVERTER_MISSING);
+  if (inverter && inverter->interface_type() == InverterInterfaceType::Can) {
+    // Check if the inverter is still sending CAN messages. If we go 60s without messages we raise a warning
+    if (!datalayer.system.status.CAN_inverter_still_alive) {
+      set_event(EVENT_CAN_INVERTER_MISSING, can_config.inverter);
+    } else {
+      datalayer.system.status.CAN_inverter_still_alive--;
+      clear_event(EVENT_CAN_INVERTER_MISSING);
+    }
   }
-#endif  //CAN_INVERTER_SELECTED
 
   if (charger) {
+    // Assuming chargers are all CAN here.
     // Check if the charger is still sending CAN messages. If we go 60s without messages we raise a warning
     if (!datalayer.charger.CAN_charger_still_alive) {
       set_event(EVENT_CAN_CHARGER_MISSING, can_config.charger);

Software/src/inverter/AFORE-CAN.h

@@ -3,7 +3,6 @@
 #include "../include.h"
 
 #ifdef AFORE_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS AforeCanInverter
 #endif
 

Software/src/inverter/BYD-CAN.h

@@ -3,7 +3,6 @@
 #include "../include.h"
 
 #ifdef BYD_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS BydCanInverter
 #endif
 

Software/src/inverter/BYD-MODBUS.h

@@ -3,7 +3,6 @@
 #include "../include.h"
 
 #ifdef BYD_MODBUS
-#define MODBUS_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS BydModbusInverter
 #endif
 

Software/src/inverter/CanInverterProtocol.h

@@ -3,11 +3,14 @@
 
 #include "InverterProtocol.h"
 
+#include "src/communication/can/CanReceiver.h"
 #include "src/devboard/utils/types.h"
 
-class CanInverterProtocol : public InverterProtocol, Transmitter {
+class CanInverterProtocol : public InverterProtocol, Transmitter, CanReceiver {
  public:
   virtual const char* interface_name() { return getCANInterfaceName(can_config.inverter); }
+  InverterInterfaceType interface_type() { return InverterInterfaceType::Can; }
+
   virtual void transmit_can(unsigned long currentMillis) = 0;
   virtual void map_can_frame_to_variable(CAN_frame rx_frame) = 0;
 
@@ -17,8 +20,13 @@ class CanInverterProtocol : public InverterProtocol, Transmitter {
     }
   }
 
+  void receive_can_frame(CAN_frame* frame) { map_can_frame_to_variable(*frame); }
+
  protected:
-  CanInverterProtocol() { register_transmitter(this); }
+  CanInverterProtocol() {
+    register_transmitter(this);
+    register_can_receiver(this, can_config.inverter);
+  }
 };
 
 #endif

Software/src/inverter/FERROAMP-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef FERROAMP_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS FerroampCanInverter
 #endif
 

Software/src/inverter/FOXESS-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef FOXESS_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS FoxessCanInverter
 #endif
 

Software/src/inverter/GROWATT-HV-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef GROWATT_HV_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS GrowattHvInverter
 #endif
 

Software/src/inverter/GROWATT-LV-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef GROWATT_LV_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS GrowattLvInverter
 #endif
 

Software/src/inverter/INVERTERS.cpp

@@ -1,47 +1,16 @@
 #include "../include.h"
 
-// These functions adapt the old C-style global functions inverter-API to the
-// object-oriented inverter protocol API.
-
 InverterProtocol* inverter = nullptr;
 
-#ifdef CAN_INVERTER_SELECTED
-CanInverterProtocol* can_inverter;
-#endif
-
-#ifdef MODBUS_INVERTER_SELECTED
-ModbusInverterProtocol* modbus_inverter;
-#endif
-
 void setup_inverter() {
-#ifdef MODBUS_INVERTER_SELECTED
-  modbus_inverter = new SELECTED_INVERTER_CLASS();
-  inverter = modbus_inverter;
-#endif
+  if (inverter) {
+    // The inverter is setup only once.
+    return;
+  }
 
-#ifdef CAN_INVERTER_SELECTED
-  can_inverter = new SELECTED_INVERTER_CLASS();
-  inverter = can_inverter;
-#endif
-
-#ifdef RS485_INVERTER_SELECTED
   inverter = new SELECTED_INVERTER_CLASS();
-#endif
 
   if (inverter) {
     inverter->setup();
   }
 }
-
-#ifdef CAN_INVERTER_SELECTED
-
-void map_can_frame_to_variable_inverter(CAN_frame rx_frame) {
-  can_inverter->map_can_frame_to_variable(rx_frame);
-}
-#endif
-
-#ifdef RS485_INVERTER_SELECTED
-void receive_RS485() {
-  ((Rs485InverterProtocol*)inverter)->receive_RS485();
-}
-#endif

Software/src/inverter/INVERTERS.h

@@ -33,13 +33,4 @@ extern InverterProtocol* inverter;
 // Call to initialize the build-time selected inverter. Safe to call even though inverter was not selected.
 void setup_inverter();
 
-#ifdef CAN_INVERTER_SELECTED
-void map_can_frame_to_variable_inverter(CAN_frame rx_frame);
-void transmit_can_inverter(unsigned long currentMillis);
-#endif
-
-#ifdef RS485_INVERTER_SELECTED
-void receive_RS485();
-#endif
-
 #endif

Software/src/inverter/InverterProtocol.h

@@ -1,11 +1,14 @@
 #ifndef INVERTER_PROTOCOL_H
 #define INVERTER_PROTOCOL_H
 
+enum class InverterInterfaceType { Can, Rs485, Modbus };
+
 // The abstract base class for all inverter protocols
 class InverterProtocol {
  public:
   virtual void setup() = 0;
   virtual const char* interface_name() = 0;
+  virtual InverterInterfaceType interface_type() = 0;
 
   // This function maps all the values fetched from battery to the correct battery emulator data structures
   virtual void update_values() = 0;

Software/src/inverter/KOSTAL-RS485.cpp

@@ -203,7 +203,7 @@ void KostalInverterProtocol::update_values() {
   }
 }
 
-void KostalInverterProtocol::receive_RS485()  // Runs as fast as possible to handle the serial stream
+void KostalInverterProtocol::receive()  // Runs as fast as possible to handle the serial stream
 {
   currentMillis = millis();
 

Software/src/inverter/KOSTAL-RS485.h

@@ -20,7 +20,7 @@
 class KostalInverterProtocol : public Rs485InverterProtocol {
  public:
   void setup();
-  void receive_RS485();
+  void receive();
   void update_values();
 
  private:

Software/src/inverter/ModbusInverterProtocol.h

@@ -10,7 +10,8 @@ extern uint16_t mbPV[];
 
 // The abstract base class for all Modbus inverter protocols
 class ModbusInverterProtocol : public InverterProtocol {
-  virtual const char* interface_name() { return "RS485 / Modbus"; }
+  const char* interface_name() { return "RS485 / Modbus"; }
+  InverterInterfaceType interface_type() { return InverterInterfaceType::Modbus; }
 
  protected:
   // Create a ModbusRTU server instance with 2000ms timeout

Software/src/inverter/PYLON-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef PYLON_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS PylonInverter
 #endif
 

Software/src/inverter/PYLON-LV-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef PYLON_LV_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS PylonLvInverter
 #endif
 

Software/src/inverter/Rs485InverterProtocol.h

@@ -1,12 +1,14 @@
-#ifndef RS485CANINVERTER_PROTOCOL_H
-#define RS485INVERTER_PROTOCOL_H
+#ifndef _RS485INVERTER_PROTOCOL_H
+#define _RS485INVERTER_PROTOCOL_H
 
 #include "InverterProtocol.h"
 
-class Rs485InverterProtocol : public InverterProtocol {
+#include "src/communication/rs485/comm_rs485.h"
+
+class Rs485InverterProtocol : public InverterProtocol, Rs485Receiver {
  public:
   virtual const char* interface_name() { return "RS485"; }
-  virtual void receive_RS485() = 0;
+  InverterInterfaceType interface_type() { return InverterInterfaceType::Rs485; }
   virtual int baud_rate() = 0;
 };
 

Software/src/inverter/SCHNEIDER-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SCHNEIDER_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SchneiderInverter
 #endif
 

Software/src/inverter/SMA-BYD-H-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SMA_BYD_H_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SmaBydHInverter
 #endif
 

Software/src/inverter/SMA-BYD-HVS-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SMA_BYD_HVS_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SmaBydHvsInverter
 #endif
 

Software/src/inverter/SMA-LV-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SMA_LV_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SmaLvInverter
 #endif
 

Software/src/inverter/SMA-TRIPOWER-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SMA_TRIPOWER_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SmaTripowerInverter
 #endif
 

Software/src/inverter/SOFAR-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SOFAR_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SofarInverter
 #endif
 

Software/src/inverter/SOLAX-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SOLAX_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SolaxInverter
 #endif
 

Software/src/inverter/SUNGROW-CAN.h

@@ -5,7 +5,6 @@
 #include "CanInverterProtocol.h"
 
 #ifdef SUNGROW_CAN
-#define CAN_INVERTER_SELECTED
 #define SELECTED_INVERTER_CLASS SungrowInverter
 #endif