Make serial compile, add github workflow

.github/workflows/compile-all-combinations.yml

@@ -55,6 +55,7 @@ jobs:
           - SMA_TRIPOWER_CAN
           - SOFAR_CAN
           - SOLAX_CAN
+          - SERIAL_LINK_TRANSMITTER
 
     # This is the platform GitHub will use to run our workflow.
     runs-on: ubuntu-latest

.github/workflows/compile-all-inverters.yml

@@ -50,6 +50,7 @@ jobs:
           - SMA_TRIPOWER_CAN
           - SOFAR_CAN
           - SOLAX_CAN
+          - SERIAL_LINK_TRANSMITTER
 
     # This is the platform GitHub will use to run our workflow.
     runs-on: ubuntu-latest

Software/Software.ino

@@ -361,9 +361,7 @@ void inform_user_on_inverter() {
 void init_battery() {
   // Inform user what battery is used and perform setup
   setup_battery();
-#ifdef SERIAL_LINK_RECEIVER
-  Serial.println("SERIAL_DATA_LINK_RECEIVER selected");
-#endif
+
 #ifndef BATTERY_SELECTED
 #error No battery selected! Choose one from the USER_SETTINGS.h file
 #endif
@@ -375,9 +373,11 @@ void receive_can() {  // This section checks if we have a complete CAN message i
   CAN_frame_t rx_frame;
   if (xQueueReceive(CAN_cfg.rx_queue, &rx_frame, 3 * portTICK_PERIOD_MS) == pdTRUE) {
     if (rx_frame.FIR.B.FF == CAN_frame_std) {
-      //printf("New standard frame");
-      // Battery
+//printf("New standard frame");
+// Battery
+#ifndef SERIAL_LINK_RECEIVER
       receive_can_battery(rx_frame);
+#endif
       // Inverter
 #ifdef BYD_CAN
       receive_can_byd(rx_frame);
@@ -651,23 +651,22 @@ void update_values() {
 #endif
 }
 
+#if defined(SERIAL_LINK_RECEIVER) || defined(SERIAL_LINK_TRANSMITTER)
 void runSerialDataLink() {
   static unsigned long updateTime = 0;
   unsigned long currentMillis = millis();
-#ifdef SERIAL_LINK_RECEIVER
-  if ((currentMillis - updateTime) > 1) {  //Every 2ms
-    updateTime = currentMillis;
-    manageSerialLinkReceiver();
-  }
-#endif
 
-#ifdef SERIAL_LINK_TRANSMITTER
   if ((currentMillis - updateTime) > 1) {  //Every 2ms
     updateTime = currentMillis;
-    manageSerialLinkTransmitter();
-  }
+#ifdef SERIAL_LINK_RECEIVER
+    manageSerialLinkReceiver();
 #endif
+#ifdef SERIAL_LINK_TRANSMITTER
+    manageSerialLinkTransmitter();
+#endif
+  }
 }
+#endif
 
 void init_serialDataLink() {
 #if defined(SERIAL_LINK_RECEIVER) || defined(SERIAL_LINK_TRANSMITTER)

Software/USER_SETTINGS.h

@@ -12,7 +12,7 @@
 //#define CHADEMO_BATTERY
 //#define IMIEV_CZERO_ION_BATTERY
 //#define KIA_HYUNDAI_64_BATTERY
-//#define NISSAN_LEAF_BATTERY
+//define NISSAN_LEAF_BATTERY
 //#define RENAULT_KANGOO_BATTERY
 //#define RENAULT_ZOE_BATTERY
 //#define SANTA_FE_PHEV_BATTERY
@@ -30,7 +30,7 @@
 //#define SOLAX_CAN        //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
 
 /* Other options */
-#define DEBUG_VIA_USB  //Enable this line to have the USB port output serial diagnostic data while program runs
+//#define DEBUG_VIA_USB  //Enable this line to have the USB port output serial diagnostic data while program runs
 //#define INTERLOCK_REQUIRED  //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
 //#define CONTACTOR_CONTROL     //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
 //#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation

Software/src/battery/BATTERIES.h

@@ -47,7 +47,12 @@
 #include "SERIAL-LINK-RECEIVER-FROM-BATTERY.h"  //See this file for more Serial-battery settings
 #endif
 
-#ifndef SERIAL_LINK_RECEIVER  // The serial thing does its thing
+#ifdef SERIAL_LINK_RECEIVER  // The serial thing does its thing
+void update_values_battery();
+void receive_can_battery();
+void send_can_battery();
+void setup_battery(void);
+#else
 void update_values_battery();
 void receive_can_battery(CAN_frame_t rx_frame);
 void send_can_battery();

Software/src/battery/SERIAL-LINK-RECEIVER-FROM-BATTERY.cpp

@@ -1,8 +1,8 @@
-// SERIAL-LINK-RECEIVER-FROM-BATTERY.cpp
-
-#include "SERIAL-LINK-RECEIVER-FROM-BATTERY.h"
+#include "BATTERIES.h"
+#ifdef SERIAL_LINK_RECEIVER
 #include <Arduino.h>
 #include "../devboard/utils/events.h"
+#include "SERIAL-LINK-RECEIVER-FROM-BATTERY.h"
 
 #define INVERTER_SEND_NUM_VARIABLES 1
 #define INVERTER_RECV_NUM_VARIABLES 16
@@ -212,3 +212,11 @@ void update_values_serial_link() {
 
   Serial.println("");
 }
+
+void setup_battery(void) {
+  Serial.println("SERIAL_DATA_LINK_RECEIVER selected");
+}
+void update_values_battery() {}
+void send_can_battery() {}
+
+#endif

Software/src/battery/SERIAL-LINK-RECEIVER-FROM-BATTERY.h

@@ -3,6 +3,8 @@
 #ifndef SERIAL_LINK_RECEIVER_FROM_BATTERY_H
 #define SERIAL_LINK_RECEIVER_FROM_BATTERY_H
 
+#define BATTERY_SELECTED
+
 #include <Arduino.h>
 #include "../../USER_SETTINGS.h"
 #include "../devboard/config.h"  // Needed for all defines
@@ -35,5 +37,6 @@ extern bool inverterAllowsContactorClosing;  //Bool, 1=true, 0=false
 
 void manageSerialLinkReceiver();
 void update_values_serial_link();
+void setup_battery(void);
 
 #endif

Software/src/inverter/SERIAL-LINK-TRANSMITTER-INVERTER.h

@@ -1,5 +1,3 @@
-//SERIAL-LINK-TRANSMITTER-INVERTER.h
-
 #ifndef SERIAL_LINK_TRANSMITTER_INVERTER_H
 #define SERIAL_LINK_TRANSMITTER_INVERTER_H