yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 09:49:32 +02:00
Code Issues Projects Releases Packages Wiki Activity

Merge branch 'main' into feature/kostal-rs485

Browse source
This commit is contained in:
Daniel Öster 2024-11-22 19:00:04 +02:00
commit 504c6b3d7a
74 changed files with 2835 additions and 931 deletions
Download patch file Download diff file Expand all files Collapse all files

6
Software/USER_SETTINGS.h
View file

@ -10,6 +10,7 @@
/* Select battery used */
//#define BMW_I3_BATTERY
//#define BMW_IX_BATTERY
//#define BYD_ATTO_3_BATTERY
//#define CELLPOWER_BMS
//#define CHADEMO_BATTERY //NOTE: inherently enables CONTACTOR_CONTROL below
@ -22,6 +23,7 @@
//#define NISSAN_LEAF_BATTERY
//#define PYLON_BATTERY
//#define RJXZS_BMS
//#define RANGE_ROVER_PHEV_BATTERY
//#define RENAULT_KANGOO_BATTERY
//#define RENAULT_TWIZY_BATTERY
//#define RENAULT_ZOE_GEN1_BATTERY
@ -42,6 +44,7 @@
//#define FOXESS_CAN //Enable this line to emulate a "HV2600/ECS4100 battery" over CAN bus
//#define PYLON_LV_CAN //Enable this line to emulate a "48V Pylontech battery" over CAN bus
//#define PYLON_CAN //Enable this line to emulate a "High Voltage Pylontech battery" over CAN bus
//#define SCHNEIDER_CAN //Enable this line to emulate a "Schneider Version 2: SE BMS" over CAN bus
//#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus
//#define SMA_TRIPOWER_CAN //Enable this line to emulate a "SMA Home Storage battery" over CAN bus
//#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus
@ -50,10 +53,11 @@
/* Select hardware used for Battery-Emulator */
#define HW_LILYGO
//#define HW_STARK
//#define HW_3LB
/* Other options */
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
//#define DEBUG_CANFD_DATA //Enable this line to have the USB port output CAN-FD data while program runs (WARNING, raises CPU load, do not use for production)
//#define DEBUG_CAN_DATA //Enable this line to print incoming/outgoing CAN & CAN-FD messages to USB serial (WARNING, raises CPU load, do not use for production)
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled.