yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 17:59:27 +02:00
Code Issues Projects Releases Packages Wiki Activity

Revert accidental changes

Browse source
This commit is contained in:
Jaakko Haakana 2025-07-06 16:59:47 +03:00
parent 6cdcb08abb
commit 5ac816b80f
1 changed files with 4 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

9
Software/USER_SETTINGS.h
View file

@ -77,11 +77,11 @@
/* Contactor settings. If you have a battery that does not activate contactors via CAN, configure this section */ /* Contactor settings. If you have a battery that does not activate contactors via CAN, configure this section */
#define PRECHARGE_TIME_MS 500 //Precharge time in milliseconds. Modify to suit your inverter (See wiki for more info) #define PRECHARGE_TIME_MS 500 //Precharge time in milliseconds. Modify to suit your inverter (See wiki for more info)
//#define CONTACTOR_CONTROL //Enable this line to have the emulator handle automatic precharge/contactor+/contactor- closing sequence (See wiki for pins) //#define CONTACTOR_CONTROL //Enable this line to have the emulator handle automatic precharge/contactor+/contactor- closing sequence (See wiki for pins)
//#define CONTACTOR_CONTROL_DOUBLE_BATTERY //Enable this line to have the emulator hardware control secondary set of contactors for double battery setups (See wiki for pins) //#define CONTACTOR_CONTROL_DOUBLE_BATTERY //Enable this line to have the emulator hardware control secondary set of contactors for double battery setups (See wiki for pins)
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled. //#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled.
//#define NC_CONTACTORS //Enable this line to control normally closed contactors. CONTACTOR_CONTROL must be enabled for this option. Extremely rare setting! //#define NC_CONTACTORS //Enable this line to control normally closed contactors. CONTACTOR_CONTROL must be enabled for this option. Extremely rare setting!
//#define PERIODIC_BMS_RESET //Enable to have the emulator powercycle the connected battery every 24hours via GPIO. Useful for some batteries like Nissan LEAF //#define PERIODIC_BMS_RESET //Enable to have the emulator powercycle the connected battery every 24hours via GPIO. Useful for some batteries like Nissan LEAF
//#define REMOTE_BMS_RESET //Enable to allow the emulator to remotely trigger a powercycle of the battery via MQTT. Useful for some batteries like Nissan LEAF //#define REMOTE_BMS_RESET //Enable to allow the emulator to remotely trigger a powercycle of the battery via MQTT. Useful for some batteries like Nissan LEAF
// PERIODIC_BMS_RESET_AT Uses NTP server, internet required. In 24 Hour format WITHOUT leading 0. e.g 0230 should be 230. Time Zone is set in USER_SETTINGS.cpp // PERIODIC_BMS_RESET_AT Uses NTP server, internet required. In 24 Hour format WITHOUT leading 0. e.g 0230 should be 230. Time Zone is set in USER_SETTINGS.cpp
//#define PERIODIC_BMS_RESET_AT 525 //#define PERIODIC_BMS_RESET_AT 525
@ -101,7 +101,6 @@
//#define EQUIPMENT_STOP_BUTTON // Enable this to allow an equipment stop button connected to the Battery-Emulator to disengage the battery //#define EQUIPMENT_STOP_BUTTON // Enable this to allow an equipment stop button connected to the Battery-Emulator to disengage the battery
//#define LFP_CHEMISTRY //Tesla specific setting, enable this line to startup in LFP mode //#define LFP_CHEMISTRY //Tesla specific setting, enable this line to startup in LFP mode
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting //#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define LOG_TO_SD //Enable this line to log diagnostic data to SD card (WARNING, raises CPU load, do not use for production) //#define LOG_TO_SD //Enable this line to log diagnostic data to SD card (WARNING, raises CPU load, do not use for production)
//#define LOG_CAN_TO_SD //Enable this line to log incoming/outgoing CAN & CAN-FD messages to SD card (WARNING, raises CPU load, do not use for production) //#define LOG_CAN_TO_SD //Enable this line to log incoming/outgoing CAN & CAN-FD messages to SD card (WARNING, raises CPU load, do not use for production)
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production) //#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
@ -109,7 +108,7 @@
//#define DEBUG_CAN_DATA //Enable this line to print incoming/outgoing CAN & CAN-FD messages to USB serial (WARNING, raises CPU load, do not use for production) //#define DEBUG_CAN_DATA //Enable this line to print incoming/outgoing CAN & CAN-FD messages to USB serial (WARNING, raises CPU load, do not use for production)
/* CAN options */ /* CAN options */
#define CAN_ADDON //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 chip (Needed for some inverters / double battery) //#define CAN_ADDON //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 chip (Needed for some inverters / double battery)
#define CRYSTAL_FREQUENCY_MHZ 8 //CAN_ADDON option, what is your MCP2515 add-on boards crystal frequency? #define CRYSTAL_FREQUENCY_MHZ 8 //CAN_ADDON option, what is your MCP2515 add-on boards crystal frequency?
//#define CANFD_ADDON //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2518FD chip / Native CANFD on Stark board //#define CANFD_ADDON //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2518FD chip / Native CANFD on Stark board
#define CANFD_ADDON_CRYSTAL_FREQUENCY_MHZ \ #define CANFD_ADDON_CRYSTAL_FREQUENCY_MHZ \
@ -126,7 +125,7 @@
//#define FUNCTION_TIME_MEASUREMENT // Enable this to record execution times and present them in the web UI (WARNING, raises CPU load, do not use for production) //#define FUNCTION_TIME_MEASUREMENT // Enable this to record execution times and present them in the web UI (WARNING, raises CPU load, do not use for production)
/* MQTT options */ /* MQTT options */
//#define MQTT // Enable this line to enable MQTT // #define MQTT // Enable this line to enable MQTT
#define MQTT_QOS 0 // MQTT Quality of Service (0, 1, or 2) #define MQTT_QOS 0 // MQTT Quality of Service (0, 1, or 2)
#define MQTT_PUBLISH_CELL_VOLTAGES // Enable this line to publish cell voltages to MQTT #define MQTT_PUBLISH_CELL_VOLTAGES // Enable this line to publish cell voltages to MQTT
#define MQTT_TIMEOUT 2000 // MQTT timeout in milliseconds #define MQTT_TIMEOUT 2000 // MQTT timeout in milliseconds