yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-05 19:42:08 +02:00
Code Issues Projects Releases Packages Wiki Activity

Merge branch 'main' into feature/foxess-inverter

Browse source
This commit is contained in:
Daniel Öster 2024-10-07 21:59:40 +03:00 • committed by GitHub
commit adcf145109
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
49 changed files with 584 additions and 294 deletions
Download patch file Download diff file Expand all files Collapse all files

9
Software/USER_SETTINGS.h
View file

@ -53,6 +53,7 @@
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled.
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 chip (Needed for some inverters / double battery)
#define CRYSTAL_FREQUENCY_MHZ 8 //DUAL_CAN option, what is your MCP2515 add-on boards crystal frequency?
//#define CAN_FD //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2518FD chip / Native CANFD on Stark board
//#define USE_CANFD_INTERFACE_AS_CLASSIC_CAN // Enable this line if you intend to use the CANFD as normal CAN
//#define SERIAL_LINK_RECEIVER //Enable this line to receive battery data over RS485 pins from another Lilygo (This LilyGo interfaces with inverter)
@ -61,11 +62,12 @@
//#define WIFICONFIG //Enable this line to set a static IP address / gateway /subnet mask for the device. see USER_SETTINGS.cpp for the settings
#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
#define WEBSERVER_AUTH_REQUIRED \
false //Enable this line to enable webserver authentication. See USER_SETTINGS.cpp setting the credentials.
false //Set this line to true to activate webserver authentication (this line must not be commented). Refer to USER_SETTINGS.cpp for setting the credentials.
#define WIFIAP //Disable this line to permanently disable WIFI AP mode (make sure to hardcode ssid and password of you home wifi network). When enabled WIFI AP can still be disabled by a setting in the future.
#define MDNSRESPONDER //Enable this line to enable MDNS, allows battery monitor te be found by .local address. Requires WEBSERVER to be enabled.
#define LOAD_SAVED_SETTINGS_ON_BOOT //Enable this line to read settings stored via the webserver on boot (overrides Wifi/battery settings set below)
//#define FUNCTION_TIME_MEASUREMENT // Enable this to record execution times and present them in the web UI (WARNING, raises CPU load, do not use for production)
//#define EQUIPMENT_STOP_BUTTON // Enable this to allow an equipment stop button connected to the Battery-Emulator to disengage the battery
/* MQTT options */
// #define MQTT // Enable this line to enable MQTT
@ -120,6 +122,11 @@ extern volatile float CHARGER_END_A;
extern bool charger_HV_enabled;
extern bool charger_aux12V_enabled;
#ifdef EQUIPMENT_STOP_BUTTON
typedef enum { LATCHING_SWITCH = 0, MOMENTARY_SWITCH = 1 } STOP_BUTTON_BEHAVIOR;
extern volatile STOP_BUTTON_BEHAVIOR equipment_stop_behavior;
#endif
#ifdef WIFICONFIG
extern IPAddress local_IP;
// Set your Gateway IP address