yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 09:49:32 +02:00
Code Issues Projects Releases Packages Wiki Activity

Update README.md

Browse source 
additional setup steps for the latest codebase.
This commit is contained in:
Bryant Eadon 2024-10-19 18:41:12 -07:00 • committed by GitHub
parent f35fb53f7f
commit b219136845
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 7 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

12
README.md
View file

@ -59,20 +59,22 @@ NOTE: In some cases, the LilyGo must be powered through the main power connector
when performing the initial firmware upload. when performing the initial firmware upload.
NOTE: On Mac, the following USB driver may need to be installed: https://github.com/WCHSoftGroup/ch34xser_macos NOTE: On Mac, the following USB driver may need to be installed: https://github.com/WCHSoftGroup/ch34xser_macos
NOTE: If you see garbled messages on the serial console, change the serial console to match the baud rate to the code, currently 115200.
This video explains all the above mentioned steps: This video explains all the above mentioned steps:
<https://youtu.be/_mH2AjnAjDk> <https://youtu.be/_mH2AjnAjDk>
### Linux Development Environment Setup ### Linux Development Environment Setup
In addition to the steps above, ESP32 requires a dependency for a Python module, pyserial install using the cli. In addition to the steps above, ESP32 requires a dependency for a Python module, pyserial install using the cli.\
```python3 -m pip install pyserial``` ```python3 -m pip install pyserial```
If you're using Ubuntu , use apt to manage the dependencies of arduino: If you're using Ubuntu , use apt to manage the dependencies of arduino:\
Arduino install: ```sudo apt install arduino```\
pyserial install: ```sudo apt install python3-serial``` pyserial install: ```sudo apt install python3-serial```
Arduino AppImage must be set as executable after downloading to run correctly\
example: ```chmod 775 arduino-ide_2.3.3_Linux_64bit.AppImage```
## Dependencies 📖 ## Dependencies 📖
This code uses the following excellent libraries: This code uses the following excellent libraries:
- [adafruit/Adafruit_NeoPixel](https://github.com/adafruit/Adafruit_NeoPixel) LGPL-3.0 license - [adafruit/Adafruit_NeoPixel](https://github.com/adafruit/Adafruit_NeoPixel) LGPL-3.0 license