yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 17:59:27 +02:00
Code Issues Projects Releases Packages Wiki Activity

Simplify GPIO for secondary battery

Browse source
This commit is contained in:
Daniel Öster 2025-06-12 23:26:43 +03:00
parent f44091997f
commit bd95cbd7cc
6 changed files with 12 additions and 33 deletions
Download patch file Download diff file Expand all files Collapse all files

20
Software/src/communication/contactorcontrol/comm_contactorcontrol.cpp
View file

@ -82,27 +82,17 @@ void init_contactors() {
set(PRECHARGE_PIN, OFF);
#endif // CONTACTOR_CONTROL
#ifdef CONTACTOR_CONTROL_DOUBLE_BATTERY
pinMode(SECOND_POSITIVE_CONTACTOR_PIN, OUTPUT);
set(SECOND_POSITIVE_CONTACTOR_PIN, OFF);
pinMode(SECOND_NEGATIVE_CONTACTOR_PIN, OUTPUT);
set(SECOND_NEGATIVE_CONTACTOR_PIN, OFF);
pinMode(SECOND_BATTERY_CONTACTORS_PIN, OUTPUT);
set(SECOND_BATTERY_CONTACTORS_PIN, OFF);
#endif // CONTACTOR_CONTROL_DOUBLE_BATTERY
// Init BMS contactor
#if defined HW_STARK || defined HW_3LB // This hardware has dedicated pin, always enable on start
pinMode(BMS_POWER, OUTPUT); //LilyGo is omitted from this, only enabled if user selects PERIODIC_BMS_RESET
digitalWrite(BMS_POWER, HIGH);
#ifdef BMS_2_POWER //Hardware supports 2x BMS
pinMode(BMS_2_POWER, OUTPUT);
digitalWrite(BMS_2_POWER, HIGH);
#endif //BMS_2_POWER
#endif // HW with dedicated BMS pins
#if defined(PERIODIC_BMS_RESET) || defined(REMOTE_BMS_RESET) // User has enabled BMS reset, turn on output on start
pinMode(BMS_POWER, OUTPUT);
digitalWrite(BMS_POWER, HIGH);
#ifdef BMS_2_POWER //Hardware supports 2x BMS
pinMode(BMS_2_POWER, OUTPUT);
digitalWrite(BMS_2_POWER, HIGH);
#endif //BMS_2_POWER
#endif //PERIODIC_BMS_RESET
}
@ -226,12 +216,10 @@ void handle_contactors() {
#ifdef CONTACTOR_CONTROL_DOUBLE_BATTERY
void handle_contactors_battery2() {
if ((contactorStatus == COMPLETED) && datalayer.system.status.battery2_allowed_contactor_closing) {
set(SECOND_NEGATIVE_CONTACTOR_PIN, ON);
set(SECOND_POSITIVE_CONTACTOR_PIN, ON);
set(SECOND_BATTERY_CONTACTORS_PIN, ON);
datalayer.system.status.contactors_battery2_engaged = true;
} else { // Closing contactors on secondary battery not allowed
set(SECOND_NEGATIVE_CONTACTOR_PIN, OFF);
set(SECOND_POSITIVE_CONTACTOR_PIN, OFF);
set(SECOND_BATTERY_CONTACTORS_PIN, OFF);
datalayer.system.status.contactors_battery2_engaged = false;
}
}

6
Software/src/devboard/hal/hw_3LB.h
View file

@ -52,11 +52,7 @@
#define NEGATIVE_CONTACTOR_PIN 33
#define PRECHARGE_PIN 25
#define BMS_POWER 2
#define SECOND_POSITIVE_CONTACTOR_PIN 13
#define SECOND_NEGATIVE_CONTACTOR_PIN 16
#define SECOND_PRECHARGE_PIN 18
#define BMS_2_POWER 12
#define SECOND_BATTERY_CONTACTORS_PIN 13
// SMA CAN contactor pins
#define INVERTER_CONTACTOR_ENABLE_PIN 36

2
Software/src/devboard/hal/hw_devkit.h
View file

@ -50,7 +50,7 @@ The pin layout below supports the following:
#define POSITIVE_CONTACTOR_PIN GPIO_NUM_5
#define NEGATIVE_CONTACTOR_PIN GPIO_NUM_16
#define PRECHARGE_PIN GPIO_NUM_17
#define SECOND_BATTERY_CONTACTORS_PIN GPIO_NUM_32
// SMA CAN contactor pins
#define INVERTER_CONTACTOR_ENABLE_PIN GPIO_NUM_14

1
Software/src/devboard/hal/hw_lilygo.h
View file

@ -52,6 +52,7 @@
#define NEGATIVE_CONTACTOR_PIN 33
#define PRECHARGE_PIN 25
#define BMS_POWER 18 // Note, this pin collides with CAN add-ons and Chademo
#define SECOND_BATTERY_CONTACTORS_PIN 15 //Note, this pin collides with SD card pins
// Automatic precharging
#define HIA4V1_PIN 25

1
Software/src/devboard/hal/hw_stark.h
View file

@ -50,6 +50,7 @@ GPIOs on extra header
#define NEGATIVE_CONTACTOR_PIN 33
#define PRECHARGE_PIN 25
#define BMS_POWER 23
#define SECOND_BATTERY_CONTACTORS_PIN 19 //Available as extra GPIO via pin header
// Automatic precharging
#define HIA4V1_PIN 19 //Available as extra GPIO via pin header

13
Software/src/devboard/webserver/webserver.cpp
View file

@ -1338,8 +1338,8 @@ String processor(const String& var) {
}
content += "</h4>";
#ifdef CONTACTOR_CONTROL_DOUBLE_BATTERY
content += "<h4>Cont. Neg.: ";
#ifdef PWM_CONTACTOR_CONTROL
content += "<h4>Cont. Neg.: ";
if (datalayer.system.status.contactors_battery2_engaged) {
content += "<span style='color: green;'>Economized</span>";
content += " Cont. Pos.: ";
@ -1349,16 +1349,9 @@ String processor(const String& var) {
content += " Cont. Pos.: ";
content += "<span style='color: red;'>&#10005;</span>";
}
#else // No PWM_CONTACTOR_CONTROL , we can read the pin and see feedback. Helpful if channel overloaded
if (digitalRead(SECOND_NEGATIVE_CONTACTOR_PIN) == HIGH) {
content += "<span style='color: green;'>&#10003;</span>";
} else {
content += "<span style='color: red;'>&#10005;</span>";
}
content += " Cont. Pos.: ";
if (digitalRead(SECOND_POSITIVE_CONTACTOR_PIN) == HIGH) {
content += "<h4>Cont. Neg.: ";
if (digitalRead(SECOND_BATTERY_CONTACTORS_PIN) == HIGH) {
content += "<span style='color: green;'>&#10003;</span>";
} else {
content += "<span style='color: red;'>&#10005;</span>";