yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-05 02:39:57 +02:00
Code Issues Projects Releases Packages Wiki Activity

Add second contactor closing function

Browse source
This commit is contained in:
Daniel Öster 2024-11-15 20:54:37 +02:00
parent 7f16ee6fb0
commit cb4a830a57
3 changed files with 42 additions and 26 deletions
Download patch file Download diff file Expand all files Collapse all files

9
Software/USER_SETTINGS.h
View file

@ -53,13 +53,16 @@
//#define HW_STARK
//#define HW_3LB
/* Contactor settings. If you have a battery that does not activate contactors via CAN, configure this section */
//#define CONTACTOR_CONTROL //Enable this line to have the emulator handle automatic precharge/contactor+/contactor- closing sequence (See wiki for pins)
//#define CONTACTOR_CONTROL_DOUBLE_BATTERY //Enable this line to have the emulator hardware control secondary set of contactors for double battery setups (See wiki for pins)
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled.
//#define NC_CONTACTORS //Enable this line to control normally closed contactors. CONTACTOR_CONTROL must be enabled for this option. Extremely rare setting!
/* Other options */
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
//#define DEBUG_CAN_DATA //Enable this line to print incoming/outgoing CAN & CAN-FD messages to USB serial (WARNING, raises CPU load, do not use for production)
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM for CONTACTOR_CONTROL, which lowers power consumption and heat generation. CONTACTOR_CONTROL must be enabled.
//#define NC_CONTACTORS //Enable this line to control normally closed contactors. CONTACTOR_CONTROL must be enabled for this option. Extremely rare setting!
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 chip (Needed for some inverters / double battery)
#define CRYSTAL_FREQUENCY_MHZ 8 //DUAL_CAN option, what is your MCP2515 add-on boards crystal frequency?
//#define CAN_FD //Enable this line to activate an isolated secondary CAN-FD bus using add-on MCP2518FD chip / Native CANFD on Stark board