yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-04 10:19:29 +02:00
Code Issues Projects Releases Packages Wiki Activity

Merge pull request #662 from No-Signal/feature/user_secrets

Browse source 
Improvement: Moving secrets from USER_SETTINGS.cpp to platformio config
This commit is contained in:
Daniel Öster 2024-12-23 15:48:30 +02:00 • committed by GitHub
commit d28c59ccfc
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
11 changed files with 47 additions and 15 deletions
Download patch file Download diff file Expand all files Collapse all files

4
Software/USER_SETTINGS.h
View file

@ -87,8 +87,6 @@
#define WIFI
//#define WIFICONFIG //Enable this line to set a static IP address / gateway /subnet mask for the device. see USER_SETTINGS.cpp for the settings
#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
#define WEBSERVER_AUTH_REQUIRED \
false //Set this line to true to activate webserver authentication (this line must not be commented). Refer to USER_SETTINGS.cpp for setting the credentials.
#define WIFIAP //Disable this line to permanently disable WIFI AP mode (make sure to hardcode ssid and password of you home wifi network). When enabled WIFI AP can still be disabled by a setting in the future.
#define MDNSRESPONDER //Enable this line to enable MDNS, allows battery monitor te be found by .local address. Requires WEBSERVER to be enabled.
#define LOAD_SAVED_SETTINGS_ON_BOOT //Enable this line to read settings stored via the webserver on boot (overrides Wifi/battery settings set below)
@ -97,8 +95,6 @@
/* MQTT options */
// #define MQTT // Enable this line to enable MQTT
#define MQTT_SERVER "192.168.xxx.yyy"
#define MQTT_PORT 1883
#define MQTT_MANUAL_TOPIC_OBJECT_NAME // Enable this to use custom MQTT topic, object ID prefix, and device name. \
// WARNING: If this is not defined, the previous default naming format \
// 'battery-emulator_esp32-XXXXXX' (based on hardware ID) will be used. \