yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 17:59:27 +02:00
Code Issues Projects Releases Packages Wiki Activity

Add Stark board as option

Browse source
This commit is contained in:
Daniel 2024-05-17 23:10:04 +03:00
parent 44efc43251
commit d98996b7be
4 changed files with 87 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

13
Software/Software.ino
View file

@ -343,8 +343,10 @@ void init_stored_settings() {
void init_CAN() {
// CAN pins
#ifdef CAN_SE_PIN
pinMode(CAN_SE_PIN, OUTPUT);
digitalWrite(CAN_SE_PIN, LOW);
#endif
CAN_cfg.speed = CAN_SPEED_500KBPS;
CAN_cfg.tx_pin_id = GPIO_NUM_27;
CAN_cfg.rx_pin_id = GPIO_NUM_26;
@ -419,16 +421,27 @@ void init_contactors() {
pinMode(PRECHARGE_PIN, OUTPUT);
digitalWrite(PRECHARGE_PIN, LOW);
#endif
// Init BMS contactor
#ifdef HW_STARK // TODO: Rewrite this so LilyGo can aslo handle this BMS contactor
pinMode(BMS_POWER, OUTPUT);
digitalWrite(BMS_POWER, HIGH);
#endif
}
void init_rs485() {
// Set up Modbus RTU Server
#ifdef RS485_EN_PIN
pinMode(RS485_EN_PIN, OUTPUT);
digitalWrite(RS485_EN_PIN, HIGH);
#endif
#ifdef RS485_SE_PIN
pinMode(RS485_SE_PIN, OUTPUT);
digitalWrite(RS485_SE_PIN, HIGH);
#endif
#ifdef PIN_5V_EN
pinMode(PIN_5V_EN, OUTPUT);
digitalWrite(PIN_5V_EN, HIGH);
#endif
#ifdef MODBUS_INVERTER_SELECTED
#ifdef BYD_MODBUS

4
Software/USER_SETTINGS.h
View file

@ -32,6 +32,10 @@
//#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
/* Select hardware used for Battery-Emulator */
#define HW_LILYGO
//#define HW_STARK
/* Other options */
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs (WARNING, raises CPU load, do not use for production)
//#define DEBUG_CANFD_DATA //Enable this line to have the USB port output CAN-FD data while program runs (WARNING, raises CPU load, do not use for production)

5
Software/src/devboard/hal/hal.h
View file

@ -3,11 +3,10 @@
#include "../../../USER_SETTINGS.h"
/* Select HW - DONT TOUCH */
#define HW_LILYGO
#if defined(HW_LILYGO)
#include "hw_lilygo.h"
#elif defined(HW_STARK)
#include "hw_stark.h"
#elif defined(HW_SJB_V1)
#include "hw_sjb_v1.h"
#endif

66
Software/src/devboard/hal/hw_stark.h Normal file
View file

@ -0,0 +1,66 @@
#ifndef __HW_STARK06_H__
#define __HW_STARK06_H__
// Board boot-up time
#define BOOTUP_TIME 1000 // Time in ms it takes before system is considered fully started up
// Core assignment
#define CORE_FUNCTION_CORE 1
#define MODBUS_CORE 0
#define WIFI_CORE 0
// RS485
// #define PIN_5V_EN 16 // No function, GPIO 16 used instead as MCP_SCK
// #define RS485_EN_PIN 17 // RE, No function, GPIO 17 is instead available as extra GPIO via pin header
#define RS485_TX_PIN 22
#define RS485_RX_PIN 21
// #define RS485_SE_PIN 19 // No function, GPIO 19 is instead available as extra GPIO via pin header
// CAN settings. CAN_2 is not defined as it can be either MCP2515 or MCP2517, defined by the user settings
#define CAN_1_TYPE ESP32CAN
// CAN1 PIN mappings, do not change these unless you are adding on extra hardware to the PCB
#define CAN_TX_PIN GPIO_NUM_27
#define CAN_RX_PIN GPIO_NUM_26
// #define CAN_SE_PIN 23 // (No function, GPIO 23 used instead as MCP_SCK)
// CAN2 defines below
// DUAL_CAN defines
//#define MCP2515_SCK 12 // SCK input of MCP2515
//#define MCP2515_MOSI 5 // SDI input of MCP2515
//#define MCP2515_MISO 34 // SDO output of MCP2515 | Pin 34 is input only, without pullup/down resistors
//#define MCP2515_CS 18 // CS input of MCP2515
//#define MCP2515_INT 35 // INT output of MCP2515 | | Pin 35 is input only, without pullup/down resistors
// CAN_FD defines
#define MCP2517_SCK 16 // SCK input of MCP2517 (Changed from 12 to 16 since 12 can be used for JTAG TDI)
#define MCP2517_SDI 5 // SDI input of MCP2517
#define MCP2517_SDO 34 // SDO output of MCP2517
#define MCP2517_CS 18 // CS input of MCP2517
#define MCP2517_INT 35 // INT output of MCP2517
// Contactor handling
#define POSITIVE_CONTACTOR_PIN 32
#define NEGATIVE_CONTACTOR_PIN 33
#define PRECHARGE_PIN 25
#define BMS_POWER 23 // Also connected to MCP_SCK
// SD card
//#define SD_MISO_PIN 2
//#define SD_MOSI_PIN 15
//#define SD_SCLK_PIN 14
//#define SD_CS_PIN 13
// LED
#define LED_PIN 4
#define LED_MAX_BRIGHTNESS 40
/* ----- Error checks below, don't change (can't be moved to separate file) ----- */
#ifndef HW_CONFIGURED
#define HW_CONFIGURED
#else
#error Multiple HW defined! Please select a single HW
#endif
#endif