yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-04 10:19:29 +02:00
Code Issues Projects Releases Packages Wiki Activity

Add final board pin mappings

Browse source
This commit is contained in:
Daniel Öster 2024-08-12 14:19:38 +03:00
parent d16144ae0d
commit e3ecf4c8e2
1 changed files with 24 additions and 25 deletions
Download patch file Download diff file Expand all files Collapse all files

49
Software/src/devboard/hal/hw_stark.h
View file

@ -1,8 +1,22 @@
#ifndef __HW_STARK06_H__ #ifndef __HW_STARK_H__
#define __HW_STARK06_H__ #define __HW_STARK_H__
/*
Stark CMR v1 - DIN-rail module with 4 power outputs, 1 x rs485, 1 x can and 1 x can-fd channel.
For more information on this board visit the project discord or contact johan@redispose.se
GPIOs on extra header
* GPIO 2
* GPIO 17 (only available if can channel 2 is inactive)
* GPIO 19
* GPIO 14 (JTAG TMS)
* GPIO 12 (JTAG TDI)
* GPIO 13 (JTAG TCK)
* GPIO 15 (JTAG TDO)
*/
// Board boot-up time // Board boot-up time
#define BOOTUP_TIME 1000 // Time in ms it takes before system is considered fully started up #define BOOTUP_TIME 5000 // Time in ms it takes before system is considered fully started up
// Core assignment // Core assignment
#define CORE_FUNCTION_CORE 1 #define CORE_FUNCTION_CORE 1
@ -10,13 +24,13 @@
#define WIFI_CORE 0 #define WIFI_CORE 0
// RS485 // RS485
// #define PIN_5V_EN 16 // No function, GPIO 16 used instead as MCP_SCK // #define PIN_5V_EN 16 // Not needed, GPIO 16 has hardware pullup for PSRAM compatibility
// #define RS485_EN_PIN 17 // RE, No function, GPIO 17 is instead available as extra GPIO via pin header // #define RS485_EN_PIN 17 // Not needed, GPIO 17 is used as SCK input of MCP2517
#define RS485_TX_PIN 22 #define RS485_TX_PIN 22
#define RS485_RX_PIN 21 #define RS485_RX_PIN 21
// #define RS485_SE_PIN 19 // No function, GPIO 19 is instead available as extra GPIO via pin header // #define RS485_SE_PIN 19 // Not needed, GPIO 19 is available as extra GPIO via pin header
// CAN settings. CAN_2 is not defined as it can be either MCP2515 or MCP2517, defined by the user settings // CAN settings
#define CAN_1_TYPE ESP32CAN #define CAN_1_TYPE ESP32CAN
// CAN1 PIN mappings, do not change these unless you are adding on extra hardware to the PCB // CAN1 PIN mappings, do not change these unless you are adding on extra hardware to the PCB
@ -24,20 +38,11 @@
#define CAN_RX_PIN GPIO_NUM_26 #define CAN_RX_PIN GPIO_NUM_26
// #define CAN_SE_PIN 23 // (No function, GPIO 23 used instead as MCP_SCK) // #define CAN_SE_PIN 23 // (No function, GPIO 23 used instead as MCP_SCK)
// CAN2 defines below
// DUAL_CAN defines
//#define MCP2515_SCK 12 // SCK input of MCP2515
//#define MCP2515_MOSI 5 // SDI input of MCP2515
//#define MCP2515_MISO 34 // SDO output of MCP2515 | Pin 34 is input only, without pullup/down resistors
//#define MCP2515_CS 18 // CS input of MCP2515
//#define MCP2515_INT 35 // INT output of MCP2515 | | Pin 35 is input only, without pullup/down resistors
// CAN_FD defines // CAN_FD defines
#define MCP2517_SCK 16 // SCK input of MCP2517 (Changed from 12 to 16 since 12 can be used for JTAG TDI) #define MCP2517_SCK 17 // SCK input of MCP2517
#define MCP2517_SDI 5 // SDI input of MCP2517 #define MCP2517_SDI 5 // SDI input of MCP2517
#define MCP2517_SDO 34 // SDO output of MCP2517 #define MCP2517_SDO 34 // SDO output of MCP2517
#define MCP2517_CS 18 // CS input of MCP2517 #define MCP2517_CS 18 // CS input of MCP2517
#define MCP2517_INT 35 // INT output of MCP2517 #define MCP2517_INT 35 // INT output of MCP2517
// Contactor handling // Contactor handling
@ -46,12 +51,6 @@
#define PRECHARGE_PIN 25 #define PRECHARGE_PIN 25
#define BMS_POWER 23 // Also connected to MCP_SCK #define BMS_POWER 23 // Also connected to MCP_SCK
// SD card
//#define SD_MISO_PIN 2
//#define SD_MOSI_PIN 15
//#define SD_SCLK_PIN 14
//#define SD_CS_PIN 13
// LED // LED
#define LED_PIN 4 #define LED_PIN 4
#define LED_MAX_BRIGHTNESS 40 #define LED_MAX_BRIGHTNESS 40