yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-06 03:50:13 +02:00
Code Issues Projects Releases Packages Wiki Activity

Rewrite with central user settings file

Browse source
This commit is contained in:
Daniel 2023-09-14 13:23:15 +03:00
parent 120fa9b5e7
commit eeefd20970
21 changed files with 72 additions and 89 deletions
Download patch file Download diff file Expand all files Collapse all files

26
Software/Software.ino
View file

@ -1,28 +1,9 @@
/* Select battery used */
#define BATTERY_TYPE_LEAF // See NISSAN-LEAF-BATTERY.h for more LEAF battery settings
//#define TESLA_MODEL_3_BATTERY // See TESLA-MODEL-3-BATTERY.h for more Tesla battery settings
//#define RENAULT_ZOE_BATTERY // See RENAULT-ZOE-BATTERY.h for more Zoe battery settings
//#define BMW_I3_BATTERY // See BMW-I3-BATTERY.h for more i3 battery settings
//#define IMIEV_ION_CZERO_BATTERY // See IMIEV-CZERO-ION-BATTERY.h for more triplet battery settings
//#define KIA_HYUNDAI_64_BATTERY // See KIA-HYUNDAI-64-BATTERY.h for more battery settings
//#define CHADEMO // See CHADEMO.h for more Chademo related settings
/* Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki */
#define MODBUS_BYD //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
//#define CAN_BYD //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
/* Other options */
#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for FoxESS inverters)
/* Do not change any code below this line unless you are sure what you are doing */
/* Only change battery specific settings and limits in their respective .h files */
/* Only change battery specific settings in "USER_SETTINGS.h" and limits in their respective .h files */
#include <Arduino.h>
#include "HardwareSerial.h"
#include "USER_SETTINGS.h"
#include "config.h"
#include "Logging.h"
#include "mbServerFCs.h"
@ -38,13 +19,10 @@ CAN_device_t CAN_cfg; // CAN Config
const int rx_queue_size = 10; // Receive Queue size
#ifdef DUAL_CAN
bool dual_can = 1;
#include "ACAN2515.h"
static const uint32_t QUARTZ_FREQUENCY = 8UL * 1000UL * 1000UL ; // 8 MHz
ACAN2515 can(MCP2515_CS, SPI, MCP2515_INT);
static ACAN2515_Buffer16 gBuffer;
#else
bool dual_can = 0;
#endif
//Interval settings