mirror of
https://github.com/dalathegreat/Battery-Emulator.git
synced 2025-10-04 18:29:48 +02:00
Rewrite with central user settings file
This commit is contained in:
Daniel
parent
120fa9b5e7
commit
eeefd20970
21 changed files with 72 additions and 89 deletions
|
|
@ -100,8 +100,7 @@ void update_values_i3_battery()
|
|||
CANstillAlive--;
|
||||
}
|
||||
|
||||
if(printValues)
|
||||
{ //values heading towards the inverter
|
||||
#ifdef DEBUG_VIA_USB
|
||||
Serial.print("SOC% battery: ");
|
||||
Serial.print(Display_SOC);
|
||||
Serial.print(" SOC% sent to inverter: ");
|
||||
|
|
@ -114,7 +113,7 @@ void update_values_i3_battery()
|
|||
Serial.print(max_target_charge_power);
|
||||
Serial.print(" Max discharge power: ");
|
||||
Serial.print(max_target_discharge_power);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_i3_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,13 +2,10 @@
|
|||
#define BMW_I3_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 24000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 1; //Should debug values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the inverter
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -2,6 +2,7 @@
|
|||
#define BYD_CAN_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
extern uint16_t SOC;
|
||||
extern uint16_t StateOfHealth;
|
||||
|
|
|
|||
|
|
@ -85,8 +85,7 @@ void update_values_chademo_battery()
|
|||
CANstillAlive--;
|
||||
}
|
||||
|
||||
if(printValues)
|
||||
{ //values heading towards the modbus registers
|
||||
#ifdef DEBUG_VIA_USB
|
||||
if(errorCode > 0)
|
||||
{
|
||||
Serial.print("ERROR CODE ACTIVE IN SYSTEM. NUMBER: ");
|
||||
|
|
@ -120,7 +119,7 @@ void update_values_chademo_battery()
|
|||
Serial.println(temperature_min);
|
||||
Serial.print("Temperature Max: ");
|
||||
Serial.println(temperature_max);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_chademo_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,13 +2,10 @@
|
|||
#define CHADEMO_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 24000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 0; //Should debug values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -73,15 +73,14 @@ void update_values_imiev_battery()
|
|||
CANstillAlive--;
|
||||
}
|
||||
|
||||
if(printValues)
|
||||
{ //values heading towards the modbus registers
|
||||
#ifdef DEBUG_VIA_USB
|
||||
Serial.print("BMU SOC: ");
|
||||
Serial.println(BMU_SOC);
|
||||
Serial.print("BMU Current: ");
|
||||
Serial.println(BMU_Current);
|
||||
Serial.print("BMU Battery Voltage: ");
|
||||
Serial.println(BMU_PackVoltage);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_imiev_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,13 +2,10 @@
|
|||
#define IMIEV_CZERO_ION_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 22000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE_ZOE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE_ZOE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 1; //Should modbus values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the Gen24
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -51,15 +51,14 @@ void update_values_kiaHyundai_64_battery()
|
|||
CANstillAlive--;
|
||||
}
|
||||
|
||||
if(printValues)
|
||||
{ //values heading towards the inverter
|
||||
#ifdef DEBUG_VIA_USB
|
||||
Serial.print("SOC% candidate 1: ");
|
||||
Serial.println(SOC_1);
|
||||
Serial.print("SOC% candidate 2: ");
|
||||
Serial.println(SOC_2);
|
||||
Serial.print("SOC% candidate 3: ");
|
||||
Serial.println(SOC_3);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_kiaHyundai_64_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,13 +2,10 @@
|
|||
#define KIA_HYUNDAI_64_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 60000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 1; //Should debug values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the Gen24
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -293,8 +293,7 @@ void update_values_leaf_battery()
|
|||
}
|
||||
|
||||
/*Finally print out values to serial if configured to do so*/
|
||||
if(printValues)
|
||||
{
|
||||
#ifdef DEBUG_VIA_USB
|
||||
if(errorCode > 0)
|
||||
{
|
||||
Serial.print("ERROR CODE ACTIVE IN SYSTEM. NUMBER: ");
|
||||
|
|
@ -350,7 +349,7 @@ void update_values_leaf_battery()
|
|||
Serial.print(Battery_current_1);
|
||||
Serial.print(" Current 2: ");
|
||||
Serial.println(Battery_current_2);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_leaf_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,14 +2,10 @@
|
|||
#define NISSAN_LEAF_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 30000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
//#define INTERLOCK_REQUIRED //Uncomment this line to skip requiring both high voltage connectors to be seated on the LEAF battery
|
||||
static byte printValues = 0; //Should modbus values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the Gen24
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -2,6 +2,7 @@
|
|||
#define PYLON_CAN_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
extern uint16_t SOC;
|
||||
extern uint16_t StateOfHealth;
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ void update_values_zoe_battery()
|
|||
StateOfHealth = (LB_SOH * 100); //Increase range from 99% -> 99.00%
|
||||
|
||||
//Calculate the SOC% value to send to Fronius
|
||||
LB_SOC = LB_MIN_SOC + (LB_MAX_SOC - LB_MIN_SOC) * (LB_SOC - MINPERCENTAGE_ZOE) / (MAXPERCENTAGE_ZOE - MINPERCENTAGE_ZOE);
|
||||
LB_SOC = LB_MIN_SOC + (LB_MAX_SOC - LB_MIN_SOC) * (LB_SOC - MINPERCENTAGE) / (MAXPERCENTAGE - MINPERCENTAGE);
|
||||
if (LB_SOC < 0)
|
||||
{ //We are in the real SOC% range of 0-20%, always set SOC sent to Fronius as 0%
|
||||
LB_SOC = 0;
|
||||
|
|
@ -98,8 +98,7 @@ void update_values_zoe_battery()
|
|||
temperature_min;
|
||||
temperature_max;
|
||||
|
||||
if(printValues)
|
||||
{ //values heading towards the modbus registers
|
||||
#ifdef DEBUG_VIA_USB
|
||||
Serial.print("BMS Status (3=OK): ");
|
||||
Serial.println(bms_status);
|
||||
Serial.print("Max discharge power: ");
|
||||
|
|
@ -118,7 +117,7 @@ void update_values_zoe_battery()
|
|||
Serial.println(temperature_min);
|
||||
Serial.print("Temperature Max: ");
|
||||
Serial.println(temperature_max);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_zoe_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,13 +2,10 @@
|
|||
#define RENAULT_ZOE_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#define BATTERY_WH_MAX 22000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger batteries but do set value over 60000
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4040 // 404.4V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 3100 // 310.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE_ZOE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE_ZOE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 1; //Should modbus values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the Gen24
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ CAN_frame_t SOLAX_100A001 = {.FIR = {.B = {.DLC = 0,.FF = CAN_frame_ext,}},.MsgI
|
|||
|
||||
void CAN_WriteFrame(CAN_frame_t* tx_frame)
|
||||
{
|
||||
if(dual_can){
|
||||
#ifdef DUAL_CAN
|
||||
CANMessage MCP2515Frame; //Struct with ACAN2515 library format, needed to use the MCP2515 library
|
||||
MCP2515Frame.id = tx_frame->MsgID;
|
||||
MCP2515Frame.ext = tx_frame->FIR.B.FF;
|
||||
|
|
@ -39,10 +39,9 @@ if(dual_can){
|
|||
MCP2515Frame.data[i] = tx_frame->data.u8[i];
|
||||
}
|
||||
can.tryToSend(MCP2515Frame);
|
||||
}
|
||||
else{
|
||||
#else
|
||||
ESP32Can.CANWriteFrame(tx_frame);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void update_values_can_solax()
|
||||
|
|
|
|||
|
|
@ -3,10 +3,10 @@
|
|||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "config.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
#include "ACAN2515.h"
|
||||
extern ACAN2515 can;
|
||||
extern bool dual_can;
|
||||
|
||||
extern uint16_t SOC;
|
||||
extern uint16_t StateOfHealth;
|
||||
|
|
|
|||
|
|
@ -1,28 +1,9 @@
|
|||
/* Select battery used */
|
||||
#define BATTERY_TYPE_LEAF // See NISSAN-LEAF-BATTERY.h for more LEAF battery settings
|
||||
//#define TESLA_MODEL_3_BATTERY // See TESLA-MODEL-3-BATTERY.h for more Tesla battery settings
|
||||
//#define RENAULT_ZOE_BATTERY // See RENAULT-ZOE-BATTERY.h for more Zoe battery settings
|
||||
//#define BMW_I3_BATTERY // See BMW-I3-BATTERY.h for more i3 battery settings
|
||||
//#define IMIEV_ION_CZERO_BATTERY // See IMIEV-CZERO-ION-BATTERY.h for more triplet battery settings
|
||||
//#define KIA_HYUNDAI_64_BATTERY // See KIA-HYUNDAI-64-BATTERY.h for more battery settings
|
||||
//#define CHADEMO // See CHADEMO.h for more Chademo related settings
|
||||
|
||||
/* Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki */
|
||||
#define MODBUS_BYD //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
|
||||
//#define CAN_BYD //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
|
||||
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
|
||||
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
|
||||
|
||||
/* Other options */
|
||||
#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle precharge/contactor+/contactor- closing sequence
|
||||
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
|
||||
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for FoxESS inverters)
|
||||
|
||||
/* Do not change any code below this line unless you are sure what you are doing */
|
||||
/* Only change battery specific settings and limits in their respective .h files */
|
||||
/* Only change battery specific settings in "USER_SETTINGS.h" and limits in their respective .h files */
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "HardwareSerial.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
#include "config.h"
|
||||
#include "Logging.h"
|
||||
#include "mbServerFCs.h"
|
||||
|
|
@ -38,13 +19,10 @@ CAN_device_t CAN_cfg; // CAN Config
|
|||
const int rx_queue_size = 10; // Receive Queue size
|
||||
|
||||
#ifdef DUAL_CAN
|
||||
bool dual_can = 1;
|
||||
#include "ACAN2515.h"
|
||||
static const uint32_t QUARTZ_FREQUENCY = 8UL * 1000UL * 1000UL ; // 8 MHz
|
||||
ACAN2515 can(MCP2515_CS, SPI, MCP2515_INT);
|
||||
static ACAN2515_Buffer16 gBuffer;
|
||||
#else
|
||||
bool dual_can = 0;
|
||||
#endif
|
||||
|
||||
//Interval settings
|
||||
|
|
|
|||
|
|
@ -126,8 +126,7 @@ void update_values_tesla_model_3_battery()
|
|||
stillAliveCAN--;
|
||||
}
|
||||
|
||||
if(printValues)
|
||||
{
|
||||
#ifdef DEBUG_VIA_USB
|
||||
if (packCtrsClosingAllowed == 0)
|
||||
{
|
||||
Serial.println("Check high voltage connectors and interlock circuit! Closing contactor not allowed! Values: ");
|
||||
|
|
@ -207,7 +206,7 @@ void update_values_tesla_model_3_battery()
|
|||
Serial.print(temperature_max);
|
||||
Serial.print(" Min temperature (C): ");
|
||||
Serial.println(temperature_min);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void receive_can_tesla_model_3_battery(CAN_frame_t rx_frame)
|
||||
|
|
|
|||
|
|
@ -2,17 +2,14 @@
|
|||
#define TESLA_MODEL_3_BATTERY_H
|
||||
#include <Arduino.h>
|
||||
#include "ESP32CAN.h"
|
||||
#include "USER_SETTINGS.h"
|
||||
|
||||
/* User definable settings for the Tesla Model 3 battery */
|
||||
//#define HVIL_OMITTED //Uncomment this line to allow battery to function without HVIL condition fulfilled. NOTE: Some values not available in this mode, see wiki
|
||||
// NOTE: Omitting this has consequences, battery cannot request a stop incase a cell over/undercharges!!! So try to fix HVIL as soon as possible
|
||||
|
||||
#define BATTERY_WH_MAX 60000 //Battery size in Wh (Maximum value Fronius accepts is 60000 [60kWh] you can use larger 65/75/90 batteries but do set value over 60000!
|
||||
#define ABSOLUTE_MAX_VOLTAGE 4030 // 403.0V,if battery voltage goes over this, charging is not possible (goes into forced discharge)
|
||||
#define ABSOLUTE_MIN_VOLTAGE 2450 // 245.0V if battery voltage goes under this, discharging further is disabled
|
||||
#define MAXPERCENTAGE 950 //95.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 150 //15.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
static byte printValues = 1; //Should modbus values be printed to serial output?
|
||||
|
||||
// These parameters need to be mapped for the Gen24
|
||||
extern uint16_t SOC;
|
||||
|
|
|
|||
35
Software/USER_SETTINGS.h
Normal file
35
Software/USER_SETTINGS.h
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
#ifndef __USER_SETTINGS_H__
|
||||
#define __USER_SETTINGS_H__
|
||||
|
||||
/* This file contains all the user configurable settings for the Battery-Emulator software */
|
||||
/* To switch between batteries/inverters, uncomment a line to enable, comment out to disable. */
|
||||
/* There are also some options for battery limits and extra functionality */
|
||||
|
||||
/* Select battery used */
|
||||
#define BATTERY_TYPE_LEAF
|
||||
//#define TESLA_MODEL_3_BATTERY
|
||||
//#define RENAULT_ZOE_BATTERY
|
||||
//#define BMW_I3_BATTERY
|
||||
//#define IMIEV_ION_CZERO_BATTERY
|
||||
//#define KIA_HYUNDAI_64_BATTERY
|
||||
//#define CHADEMO
|
||||
|
||||
/* Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki */
|
||||
#define MODBUS_BYD //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
|
||||
//#define CAN_BYD //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
|
||||
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
|
||||
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
|
||||
|
||||
/* Battery settings */
|
||||
#define BATTERY_WH_MAX 30000 //Battery size in Wh (Maximum value for most inverters is 60000 [60kWh], you can use larger batteries but do set value over 60000!
|
||||
#define MAXPERCENTAGE 800 //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
||||
#define MINPERCENTAGE 200 //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
||||
//define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
|
||||
|
||||
/* Other options */
|
||||
#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs
|
||||
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
|
||||
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
|
||||
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for FoxESS inverters)
|
||||
|
||||
#endif
|
||||
|
|
@ -1,13 +1,17 @@
|
|||
#ifndef __CONFIG_H__
|
||||
#ifndef __CINFIG_H__
|
||||
#define __CONFIG_H__
|
||||
|
||||
// PIN
|
||||
// PIN mappings, do not change these unless you are adding on extra hardware to the PCB
|
||||
#define PIN_5V_EN 16
|
||||
|
||||
#define CAN_TX_PIN 27
|
||||
#define CAN_RX_PIN 26
|
||||
#define CAN_SE_PIN 23
|
||||
|
||||
#define RS485_EN_PIN 17 // 17 /RE
|
||||
#define RS485_TX_PIN 22 // 21
|
||||
#define RS485_RX_PIN 21 // 22
|
||||
#define RS485_SE_PIN 19 // 22 /SHDN
|
||||
|
||||
#ifdef DUAL_CAN
|
||||
#define MCP2515_SCK 12 // SCK input of MCP2515
|
||||
#define MCP2515_MOSI 5 // SDI input of MCP2515
|
||||
|
|
@ -16,11 +20,6 @@
|
|||
#define MCP2515_INT 35 // INT output of MCP2515 | | Pin 35 is input only, without pullup/down resistors
|
||||
#endif
|
||||
|
||||
#define RS485_EN_PIN 17 // 17 /RE
|
||||
#define RS485_TX_PIN 22 // 21
|
||||
#define RS485_RX_PIN 21 // 22
|
||||
#define RS485_SE_PIN 19 // 22 /SHDN
|
||||
|
||||
#ifdef CONTACTOR_CONTROL
|
||||
#define POSITIVE_CONTACTOR_PIN 32
|
||||
#define NEGATIVE_CONTACTOR_PIN 33
|
||||
|
|
@ -31,7 +30,6 @@
|
|||
#define SD_MOSI_PIN 15
|
||||
#define SD_SCLK_PIN 14
|
||||
#define SD_CS_PIN 13
|
||||
|
||||
#define WS2812_PIN 4
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue