mirror of
https://github.com/dalathegreat/Battery-Emulator.git
synced 2025-10-05 10:49:42 +02:00
Add base for SMA Tripower protocol
This commit is contained in:
Daniel
parent
a238c8b925
commit
fa69220c6a
5 changed files with 415 additions and 2 deletions
|
|
@ -345,6 +345,9 @@ void inform_user_on_inverter() {
|
||||||
#ifdef SMA_CAN
|
#ifdef SMA_CAN
|
||||||
Serial.println("SMA CAN protocol selected");
|
Serial.println("SMA CAN protocol selected");
|
||||||
#endif
|
#endif
|
||||||
|
#ifdef SMA_TRIPOWER_CAN
|
||||||
|
Serial.println("SMA Tripower CAN protocol selected");
|
||||||
|
#endif
|
||||||
#ifdef SOFAR_CAN
|
#ifdef SOFAR_CAN
|
||||||
Serial.println("SOFAR CAN protocol selected");
|
Serial.println("SOFAR CAN protocol selected");
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -439,6 +442,9 @@ void receive_can() { // This section checks if we have a complete CAN message i
|
||||||
#endif
|
#endif
|
||||||
#ifdef SMA_CAN
|
#ifdef SMA_CAN
|
||||||
receive_can_sma(rx_frame);
|
receive_can_sma(rx_frame);
|
||||||
|
#endif
|
||||||
|
#ifdef SMA_TRIPOWER_CAN
|
||||||
|
receive_can_sma_tripower(rx_frame);
|
||||||
#endif
|
#endif
|
||||||
// Charger
|
// Charger
|
||||||
#ifdef CHEVYVOLT_CHARGER
|
#ifdef CHEVYVOLT_CHARGER
|
||||||
|
|
@ -471,6 +477,9 @@ void send_can() {
|
||||||
#ifdef SMA_CAN
|
#ifdef SMA_CAN
|
||||||
send_can_sma();
|
send_can_sma();
|
||||||
#endif
|
#endif
|
||||||
|
#ifdef SMA_TRIPOWER_CAN
|
||||||
|
send_can_sma_tripower();
|
||||||
|
#endif
|
||||||
#ifdef SOFAR_CAN
|
#ifdef SOFAR_CAN
|
||||||
send_can_sofar();
|
send_can_sofar();
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -730,6 +739,9 @@ void update_values() {
|
||||||
#ifdef SMA_CAN
|
#ifdef SMA_CAN
|
||||||
update_values_can_sma();
|
update_values_can_sma();
|
||||||
#endif
|
#endif
|
||||||
|
#ifdef SMA_TRIPOWER_CAN
|
||||||
|
update_values_can_sma_tripower();
|
||||||
|
#endif
|
||||||
#ifdef SOFAR_CAN
|
#ifdef SOFAR_CAN
|
||||||
update_values_can_sofar();
|
update_values_can_sofar();
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -25,6 +25,7 @@
|
||||||
//#define LUNA2000_MODBUS //Enable this line to emulate a "Luna2000 battery" over Modbus RTU
|
//#define LUNA2000_MODBUS //Enable this line to emulate a "Luna2000 battery" over Modbus RTU
|
||||||
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
|
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
|
||||||
//#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus
|
//#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus
|
||||||
|
//#define SMA_TRIPOWER_CAN //Enable this line to emulate a "SMA Home Storage battery" over CAN bus
|
||||||
//#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus
|
//#define SOFAR_CAN //Enable this line to emulate a "Sofar Energy Storage Inverter High Voltage BMS General Protocol (Extended Frame)" over CAN bus
|
||||||
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
|
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -21,6 +21,10 @@
|
||||||
#include "SMA-CAN.h"
|
#include "SMA-CAN.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#ifdef SMA_TRIPOWER_CAN
|
||||||
|
#include "SMA-TRIPOWER-CAN.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef SOFAR_CAN
|
#ifdef SOFAR_CAN
|
||||||
#include "SOFAR-CAN.h"
|
#include "SOFAR-CAN.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
364
Software/src/inverter/SMA-TRIPOWER-CAN.cpp
Normal file
364
Software/src/inverter/SMA-TRIPOWER-CAN.cpp
Normal file
|
|
@ -0,0 +1,364 @@
|
||||||
|
#include "SMA-TRIPOWER-CAN.h"
|
||||||
|
#include "../lib/miwagner-ESP32-Arduino-CAN/CAN_config.h"
|
||||||
|
#include "../lib/miwagner-ESP32-Arduino-CAN/ESP32CAN.h"
|
||||||
|
|
||||||
|
/* TODO:
|
||||||
|
- Figure out the manufacturer info needed in send_tripower_init() CAN messages
|
||||||
|
- CAN logs from real system might be needed
|
||||||
|
- Figure out how cellvoltages need to be displayed
|
||||||
|
- Figure out if sending send_tripower_init() like we do now is OK
|
||||||
|
- Figure out how to send the non-cyclic messages when needed
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Do not change code below unless you are sure what you are doing */
|
||||||
|
static unsigned long previousMillis500ms = 0; // will store last time a 100ms CAN Message was send
|
||||||
|
static const int interval500ms = 100; // interval (ms) at which send CAN Messages
|
||||||
|
|
||||||
|
//Actual content messages
|
||||||
|
static CAN_frame_t SMA_00D = { // Battery Limits
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x00D,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_00F = { // Battery State
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x00F,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_011 = { // Battery Energy
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x011,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_013 = { // Battery Measurements
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x013,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_014 = { // Battery Tempeartures and Cellvoltages
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x014,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_005 = { // Battery Alarms 1
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x005,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_007 = { // Battery Alarms 2
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x007,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_006 = { // Battery Error Codes
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x006,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_008 = { // Battery Events
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x008,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_015 = { // Battery Data 1
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x015,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_016 = { // Battery Data 2
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x016,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_017 = { // Battery Manufacturer
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x017,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
static CAN_frame_t SMA_018 = { // Battery Name
|
||||||
|
.FIR = {.B =
|
||||||
|
{
|
||||||
|
.DLC = 8,
|
||||||
|
.FF = CAN_frame_std,
|
||||||
|
}},
|
||||||
|
.MsgID = 0x018,
|
||||||
|
.data = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
|
||||||
|
|
||||||
|
static int discharge_current = 0;
|
||||||
|
static int charge_current = 0;
|
||||||
|
static int temperature_average = 0;
|
||||||
|
static int ampere_hours_remaining = 0;
|
||||||
|
static int ampere_hours_max = 0;
|
||||||
|
static bool batteryAlarm = false;
|
||||||
|
static bool BMSevent = false;
|
||||||
|
|
||||||
|
enum BatteryState { NA, INIT, BAT_STANDBY, OPERATE, WARNING, FAULTED, UPDATE, BAT_UPDATE };
|
||||||
|
BatteryState batteryState = OPERATE;
|
||||||
|
enum InverterControlFlags {
|
||||||
|
EMG_CHARGE_REQUEST,
|
||||||
|
EMG_DISCHARGE_REQUEST,
|
||||||
|
NOT_ENOUGH_ENERGY_FOR_START,
|
||||||
|
INVERTER_STAY_ON,
|
||||||
|
FORCED_BATTERY_SHUTDOWN,
|
||||||
|
RESERVED,
|
||||||
|
BATTERY_UPDATE_AVAILABLE,
|
||||||
|
NO_BATTERY_UPDATED_BY_INV
|
||||||
|
};
|
||||||
|
InverterControlFlags inverterControlFlags = BATTERY_UPDATE_AVAILABLE;
|
||||||
|
enum Events0 {
|
||||||
|
START_SOC_CALIBRATE,
|
||||||
|
STOP_SOC_CALIBRATE,
|
||||||
|
START_POWERLIMIT,
|
||||||
|
STOP_POWERLIMIT,
|
||||||
|
PREVENTATIVE_BAT_SHUTDOWN,
|
||||||
|
THERMAL_MANAGEMENT,
|
||||||
|
START_BALANCING,
|
||||||
|
STOP_BALANCING
|
||||||
|
};
|
||||||
|
Events0 events0 = START_BALANCING;
|
||||||
|
enum Events1 { START_BATTERY_SELFTEST, STOP_BATTERY_SELFTEST };
|
||||||
|
Events1 events1 = START_BATTERY_SELFTEST;
|
||||||
|
enum Command2Battery { IDLE, RUN, NOT_USED1, NOT_USED2, SHUTDOWN, FIRMWARE_UPDATE, BATSELFUPDATE, NOT_USED3 };
|
||||||
|
Command2Battery command2Battery = RUN;
|
||||||
|
enum InvInitState { SYSTEM_FREQUENCY, XPHASE_SYSTEM, BLACKSTART_OPERATION };
|
||||||
|
InvInitState invInitState = SYSTEM_FREQUENCY;
|
||||||
|
|
||||||
|
void update_values_can_sma_tripower() { //This function maps all the values fetched from battery CAN to the inverter CAN
|
||||||
|
//Calculate values
|
||||||
|
charge_current =
|
||||||
|
((max_target_charge_power * 10) / max_voltage); //Charge power in W , max volt in V+1decimal (P=UI, solve for I)
|
||||||
|
//The above calculation results in (30 000*10)/3700=81A
|
||||||
|
charge_current = (charge_current * 10); //Value needs a decimal before getting sent to inverter (81.0A)
|
||||||
|
|
||||||
|
discharge_current = ((max_target_discharge_power * 10) /
|
||||||
|
max_voltage); //Charge power in W , max volt in V+1decimal (P=UI, solve for I)
|
||||||
|
//The above calculation results in (30 000*10)/3700=81A
|
||||||
|
discharge_current = (discharge_current * 10); //Value needs a decimal before getting sent to inverter (81.0A)
|
||||||
|
|
||||||
|
temperature_average = ((temperature_max + temperature_min) / 2);
|
||||||
|
|
||||||
|
ampere_hours_remaining =
|
||||||
|
((remaining_capacity_Wh / battery_voltage) * 100); //(WH[10000] * V+1[3600])*100 = 270 (27.0Ah)
|
||||||
|
ampere_hours_max = ((capacity_Wh / battery_voltage) * 100); //(WH[10000] * V+1[3600])*100 = 270 (27.0Ah)
|
||||||
|
|
||||||
|
batteryState = OPERATE;
|
||||||
|
inverterControlFlags = INVERTER_STAY_ON;
|
||||||
|
|
||||||
|
//Map values to CAN messages
|
||||||
|
// Battery Limits
|
||||||
|
//Battery Max Charge Voltage (eg 400.0V = 4000 , 16bits long)
|
||||||
|
SMA_00D.data.u8[0] = (max_voltage >> 8);
|
||||||
|
SMA_00D.data.u8[1] = (max_voltage & 0x00FF);
|
||||||
|
//Battery Min Discharge Voltage (eg 300.0V = 3000 , 16bits long)
|
||||||
|
SMA_00D.data.u8[2] = (min_voltage >> 8);
|
||||||
|
SMA_00D.data.u8[3] = (min_voltage & 0x00FF);
|
||||||
|
//Discharge limited current, 500 = 50A, (0.1, A)
|
||||||
|
SMA_00D.data.u8[4] = (discharge_current >> 8);
|
||||||
|
SMA_00D.data.u8[5] = (discharge_current & 0x00FF);
|
||||||
|
//Charge limited current, 125 =12.5A (0.1, A)
|
||||||
|
SMA_00D.data.u8[6] = (charge_current >> 8);
|
||||||
|
SMA_00D.data.u8[7] = (charge_current & 0x00FF);
|
||||||
|
|
||||||
|
// Battery State
|
||||||
|
//SOC (100.00%)
|
||||||
|
SMA_00F.data.u8[0] = (SOC >> 8);
|
||||||
|
SMA_00F.data.u8[1] = (SOC & 0x00FF);
|
||||||
|
//StateOfHealth (100.00%)
|
||||||
|
SMA_00F.data.u8[2] = (StateOfHealth >> 8);
|
||||||
|
SMA_00F.data.u8[3] = (StateOfHealth & 0x00FF);
|
||||||
|
//State of charge (AH, 0.1)
|
||||||
|
SMA_00F.data.u8[4] = (ampere_hours_remaining >> 8);
|
||||||
|
SMA_00F.data.u8[5] = (ampere_hours_remaining & 0x00FF);
|
||||||
|
//Fully charged (AH, 0.1)
|
||||||
|
SMA_00F.data.u8[6] = (ampere_hours_max >> 8);
|
||||||
|
SMA_00F.data.u8[7] = (ampere_hours_max & 0x00FF);
|
||||||
|
|
||||||
|
// Battery Energy
|
||||||
|
//Charged Energy Counter TODO: are these needed?
|
||||||
|
//SMA_011.data.u8[0] = (X >> 8);
|
||||||
|
//SMA_011.data.u8[1] = (X & 0x00FF);
|
||||||
|
//SMA_011.data.u8[2] = (X >> 8);
|
||||||
|
//SMA_011.data.u8[3] = (X & 0x00FF);
|
||||||
|
//Discharged Energy Counter TODO: are these needed?
|
||||||
|
//SMA_011.data.u8[4] = (X >> 8);
|
||||||
|
//SMA_011.data.u8[5] = (X & 0x00FF);
|
||||||
|
//SMA_011.data.u8[6] = (X >> 8);
|
||||||
|
//SMA_011.data.u8[7] = (X & 0x00FF);
|
||||||
|
|
||||||
|
// Battery Measurements
|
||||||
|
//Voltage (370.0)
|
||||||
|
SMA_013.data.u8[0] = (battery_voltage >> 8);
|
||||||
|
SMA_013.data.u8[1] = (battery_voltage & 0x00FF);
|
||||||
|
//Current (TODO: signed OK?)
|
||||||
|
SMA_013.data.u8[2] = (battery_current >> 8);
|
||||||
|
SMA_013.data.u8[3] = (battery_current & 0x00FF);
|
||||||
|
//Temperature average
|
||||||
|
SMA_013.data.u8[4] = (temperature_average >> 8);
|
||||||
|
SMA_013.data.u8[5] = (temperature_average & 0x00FF);
|
||||||
|
//Battery state
|
||||||
|
SMA_013.data.u8[6] = batteryState;
|
||||||
|
SMA_013.data.u8[6] = inverterControlFlags;
|
||||||
|
|
||||||
|
// Battery Temperature and Cellvoltages
|
||||||
|
// Battery max temperature
|
||||||
|
SMA_014.data.u8[0] = (temperature_max >> 8);
|
||||||
|
SMA_014.data.u8[1] = (temperature_max & 0x00FF);
|
||||||
|
// Battery min temperature
|
||||||
|
SMA_014.data.u8[2] = (temperature_min >> 8);
|
||||||
|
SMA_014.data.u8[3] = (temperature_min & 0x00FF);
|
||||||
|
// Battery Cell Voltage (sum)
|
||||||
|
//SMA_014.data.u8[4] = (??? >> 8); //TODO scaling?
|
||||||
|
//SMA_014.data.u8[5] = (??? & 0x00FF); //TODO scaling?
|
||||||
|
// Cell voltage min
|
||||||
|
//SMA_014.data.u8[6] = (??? >> 8); //TODO scaling? 0-255
|
||||||
|
// Cell voltage max
|
||||||
|
//SMA_014.data.u8[7] = (??? >> 8); //TODO scaling? 0-255
|
||||||
|
|
||||||
|
//SMA_006.data.u8[0] = (ErrorCode >> 8);
|
||||||
|
//SMA_006.data.u8[1] = (ErrorCode & 0x00FF);
|
||||||
|
//SMA_006.data.u8[2] = ModuleNumber;
|
||||||
|
//SMA_006.data.u8[3] = ErrorLevel;
|
||||||
|
//SMA_008.data.u8[0] = Events0;
|
||||||
|
//SMA_008.data.u8[1] = Events1;
|
||||||
|
|
||||||
|
//SMA_005.data.u8[0] = BMSalarms0;
|
||||||
|
//SMA_005.data.u8[1] = BMSalarms1;
|
||||||
|
//SMA_005.data.u8[2] = BMSalarms2;
|
||||||
|
//SMA_005.data.u8[3] = BMSalarms3;
|
||||||
|
//SMA_005.data.u8[4] = BMSalarms4;
|
||||||
|
//SMA_005.data.u8[5] = BMSalarms5;
|
||||||
|
//SMA_005.data.u8[6] = BMSalarms6;
|
||||||
|
//SMA_005.data.u8[7] = BMSalarms7;
|
||||||
|
|
||||||
|
//SMA_007.data.u8[0] = DCDCalarms0;
|
||||||
|
//SMA_007.data.u8[1] = DCDCalarms1;
|
||||||
|
//SMA_007.data.u8[2] = DCDCalarms2;
|
||||||
|
//SMA_007.data.u8[3] = DCDCalarms3;
|
||||||
|
//SMA_007.data.u8[4] = DCDCwarnings0;
|
||||||
|
//SMA_007.data.u8[5] = DCDCwarnings1;
|
||||||
|
//SMA_007.data.u8[6] = DCDCwarnings2;
|
||||||
|
//SMA_007.data.u8[7] = DCDCwarnings3;
|
||||||
|
|
||||||
|
//SMA_015.data.u8[0] = BatterySystemVersion;
|
||||||
|
//SMA_015.data.u8[1] = BatterySystemVersion;
|
||||||
|
//SMA_015.data.u8[2] = BatterySystemVersion;
|
||||||
|
//SMA_015.data.u8[3] = BatterySystemVersion;
|
||||||
|
//SMA_015.data.u8[4] = BatteryCapacity;
|
||||||
|
//SMA_015.data.u8[5] = BatteryCapacity;
|
||||||
|
//SMA_015.data.u8[6] = NumberOfModules;
|
||||||
|
//SMA_015.data.u8[7] = BatteryManufacturerID;
|
||||||
|
|
||||||
|
//SMA_016.data.u8[0] = SerialNumber;
|
||||||
|
//SMA_016.data.u8[1] = SerialNumber;
|
||||||
|
//SMA_016.data.u8[2] = SerialNumber;
|
||||||
|
//SMA_016.data.u8[3] = SerialNumber;
|
||||||
|
//SMA_016.data.u8[4] = ManufacturingDate;
|
||||||
|
//SMA_016.data.u8[5] = ManufacturingDate;
|
||||||
|
//SMA_016.data.u8[6] = ManufacturingDate;
|
||||||
|
//SMA_016.data.u8[7] = ManufacturingDate;
|
||||||
|
|
||||||
|
//SMA_017.data.u8[0] = Multiplex;
|
||||||
|
//SMA_017.data.u8[1] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[2] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[3] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[4] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[5] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[6] = ManufacturerName;
|
||||||
|
//SMA_017.data.u8[7] = ManufacturerName;
|
||||||
|
|
||||||
|
//SMA_018.data.u8[0] = Multiplex;
|
||||||
|
//SMA_018.data.u8[1] = BatteryName;
|
||||||
|
//SMA_018.data.u8[2] = BatteryName;
|
||||||
|
//SMA_018.data.u8[3] = BatteryName;
|
||||||
|
//SMA_018.data.u8[4] = BatteryName;
|
||||||
|
//SMA_018.data.u8[5] = BatteryName;
|
||||||
|
//SMA_018.data.u8[6] = BatteryName;
|
||||||
|
//SMA_018.data.u8[7] = BatteryName;
|
||||||
|
}
|
||||||
|
|
||||||
|
void receive_can_sma_tripower(CAN_frame_t rx_frame) {
|
||||||
|
switch (rx_frame.MsgID) {
|
||||||
|
case 0x00D: //Inverter Measurements
|
||||||
|
break;
|
||||||
|
case 0x00F: //Inverter Feedback
|
||||||
|
break;
|
||||||
|
case 0x010: //Time from inverter
|
||||||
|
break;
|
||||||
|
case 0x015: //Initialization message from inverter
|
||||||
|
send_tripower_init();
|
||||||
|
break;
|
||||||
|
case 0x017: //Initialization message from inverter 2
|
||||||
|
//send_tripower_init();
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void send_can_sma_tripower() {
|
||||||
|
unsigned long currentMillis = millis();
|
||||||
|
|
||||||
|
// Send CAN Message every 500ms
|
||||||
|
if (currentMillis - previousMillis500ms >= interval500ms) {
|
||||||
|
previousMillis500ms = currentMillis;
|
||||||
|
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_00D); //Battery limits
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_00F); // Battery state
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_011); // Battery Energy
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_013); // Battery Measurements
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_014); // Battery Temperatures and cellvoltages
|
||||||
|
}
|
||||||
|
|
||||||
|
if (batteryAlarm) { //Non-cyclic
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_005); // Battery Alarms 1
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_007); // Battery Alarms 2
|
||||||
|
}
|
||||||
|
|
||||||
|
if (BMSevent) { //Non-cyclic
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_006); // Battery Errorcode
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_008); // Battery Events
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void send_tripower_init() {
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_015); // Battery Data 1
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_016); // Battery Data 2
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_017); // Battery Manufacturer
|
||||||
|
ESP32Can.CANWriteFrame(&SMA_018); // Battery Name
|
||||||
|
}
|
||||||
32
Software/src/inverter/SMA-TRIPOWER-CAN.h
Normal file
32
Software/src/inverter/SMA-TRIPOWER-CAN.h
Normal file
|
|
@ -0,0 +1,32 @@
|
||||||
|
#ifndef SMA_CAN_TRIPOWER_H
|
||||||
|
#define SMA_CAN_TRIPOWER_H
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include "../../USER_SETTINGS.h"
|
||||||
|
#include "../devboard/config.h" // Needed for all defines
|
||||||
|
#include "../lib/miwagner-ESP32-Arduino-CAN/ESP32CAN.h"
|
||||||
|
|
||||||
|
extern uint16_t SOC; //SOC%, 0-100.00 (0-10000)
|
||||||
|
extern uint16_t StateOfHealth; //SOH%, 0-100.00 (0-10000)
|
||||||
|
extern uint16_t battery_voltage; //V+1, 0-500.0 (0-5000)
|
||||||
|
extern uint16_t battery_current; //A+1, Goes thru convert2unsignedint16 function (5.0A = 50, -5.0A = 65485)
|
||||||
|
extern uint16_t capacity_Wh; //Wh, 0-60000
|
||||||
|
extern uint16_t remaining_capacity_Wh; //Wh, 0-60000
|
||||||
|
extern uint16_t max_target_discharge_power; //W, 0-60000
|
||||||
|
extern uint16_t max_target_charge_power; //W, 0-60000
|
||||||
|
extern uint8_t bms_char_dis_status; //Enum, 0-2
|
||||||
|
extern uint16_t stat_batt_power; //W, Goes thru convert2unsignedint16 function (5W = 5, -5W = 65530)
|
||||||
|
extern uint16_t temperature_min; //C+1, Goes thru convert2unsignedint16 function (15.0C = 150, -15.0C = 65385)
|
||||||
|
extern uint16_t temperature_max; //C+1, Goes thru convert2unsignedint16 function (15.0C = 150, -15.0C = 65385)
|
||||||
|
extern uint16_t cell_max_voltage; //mV, 0-4350
|
||||||
|
extern uint16_t cell_min_voltage; //mV, 0-4350
|
||||||
|
extern uint16_t min_voltage;
|
||||||
|
extern uint16_t max_voltage;
|
||||||
|
extern bool batteryAllowsContactorClosing; //Bool, 1=true, 0=false
|
||||||
|
extern bool inverterAllowsContactorClosing; //Bool, 1=true, 0=false
|
||||||
|
|
||||||
|
void update_values_can_sma_tripower();
|
||||||
|
void send_can_sma_tripower();
|
||||||
|
void receive_can_sma_tripower(CAN_frame_t rx_frame);
|
||||||
|
void send_tripower_init();
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Add table
Add a link
Reference in a new issue