yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-03 09:49:32 +02:00
Code Issues Projects Releases Packages Wiki Activity
Battery-Emulator/Software/src/devboard/utils/events.cpp
Daniel Öster 035831f2bf Add event for blown fuse
2025-01-15 12:11:39 +02:00

604 lines
27 KiB
C++
Raw Blame History

#include "events.h"
#include "../../datalayer/datalayer.h"
#ifndef UNIT_TEST
#include <EEPROM.h>
#endif
#include "../../../USER_SETTINGS.h"
#include "timer.h"
#define EE_NOF_EVENT_ENTRIES 30
#define EE_EVENT_ENTRY_SIZE sizeof(EVENT_LOG_ENTRY_TYPE)
#define EE_WRITE_PERIOD_MINUTES 10
/** EVENT LOG STRUCTURE
*
* The event log is stored in a simple header-block structure. The
* header contains a magic number to identify it as an event log,
* a head index and a tail index. The head index points to the last
* recorded event, the tail index points to the "oldest" event in the
* log. The event log is set up like a circular buffer, so we only
* store the set amount of events. The head continuously overwrites
* the oldest events, and both the head and tail indices wrap around
* to 0 at the end of the event log:
*
* [ HEADER ]
* [ MAGIC NUMBER ][ HEAD INDEX ][ TAIL INDEX ][ EVENT BLOCK 0 ][ EVENT BLOCK 1]...
* [ 2 bytes ][ 2 bytes ][ 2 bytes ][ 6 bytes ][ 6 bytes ]
*
* 1024 bytes are allocated to the event log in flash emulated EEPROM,
* giving room for (1024 - (2 + 2 + 2)) / 6 ~= 169 events
*
* For now, we store 30 to make it easier to handle initial debugging.
*/
#define EE_EVENT_LOG_START_ADDRESS 0
#define EE_EVENT_LOG_HEAD_INDEX_ADDRESS EE_EVENT_LOG_START_ADDRESS + 2
#define EE_EVENT_LOG_TAIL_INDEX_ADDRESS EE_EVENT_LOG_HEAD_INDEX_ADDRESS + 2
#define EE_EVENT_ENTRY_START_ADDRESS EE_EVENT_LOG_TAIL_INDEX_ADDRESS + 2
typedef struct {
EVENTS_ENUM_TYPE event;
uint8_t millisrolloverCount;
uint32_t timestamp;
uint8_t data;
} EVENT_LOG_ENTRY_TYPE;
typedef struct {
EVENTS_STRUCT_TYPE entries[EVENT_NOF_EVENTS];
MyTimer ee_timer;
EVENTS_LEVEL_TYPE level;
uint16_t event_log_head_index;
uint16_t event_log_tail_index;
uint8_t nof_logged_events;
uint16_t nof_eeprom_writes;
} EVENT_TYPE;
/* Local variables */
static EVENT_TYPE events;
static const char* EVENTS_ENUM_TYPE_STRING[] = {EVENTS_ENUM_TYPE(GENERATE_STRING)};
static const char* EVENTS_LEVEL_TYPE_STRING[] = {EVENTS_LEVEL_TYPE(GENERATE_STRING)};
static uint32_t lastMillis = millis();
/* Local function prototypes */
static void set_event(EVENTS_ENUM_TYPE event, uint8_t data, bool latched);
static void update_event_level(void);
static void update_bms_status(void);
static void log_event(EVENTS_ENUM_TYPE event, uint8_t millisrolloverCount, uint32_t timestamp, uint8_t data);
static void print_event_log(void);
uint8_t millisrolloverCount = 0;
/* Exported functions */
/* Main execution function, should handle various continuous functionality */
void run_event_handling(void) {
uint32_t currentMillis = millis();
if (currentMillis < lastMillis) { // Overflow detected
millisrolloverCount++;
}
lastMillis = currentMillis;
update_event_level();
}
/* Initialization function */
void init_events(void) {
EEPROM.begin(1024);
events.nof_logged_events = 0;
uint16_t header = EEPROM.readUShort(EE_EVENT_LOG_START_ADDRESS);
if (header != EE_MAGIC_HEADER_VALUE) {
// The header doesn't appear to be a compatible event log, clear it and initialize
EEPROM.writeUShort(EE_EVENT_LOG_START_ADDRESS, EE_MAGIC_HEADER_VALUE);
EEPROM.writeUShort(EE_EVENT_LOG_HEAD_INDEX_ADDRESS, 0);
EEPROM.writeUShort(EE_EVENT_LOG_TAIL_INDEX_ADDRESS, 0);
// Prepare an empty event block to write
EVENT_LOG_ENTRY_TYPE entry = {.event = EVENT_NOF_EVENTS, .millisrolloverCount = 0, .timestamp = 0, .data = 0};
// Put the event in (what I guess is) the RAM EEPROM mirror, or write buffer
for (int i = 0; i < EE_NOF_EVENT_ENTRIES; i++) {
// Start at the oldest event, work through the log all the way the the head
int address = EE_EVENT_ENTRY_START_ADDRESS + EE_EVENT_ENTRY_SIZE * i;
EEPROM.put(address, entry);
}
// Push changes to eeprom
EEPROM.commit();
#ifdef DEBUG_LOG
logging.println("EEPROM wasn't ready");
#endif
} else {
events.event_log_head_index = EEPROM.readUShort(EE_EVENT_LOG_HEAD_INDEX_ADDRESS);
events.event_log_tail_index = EEPROM.readUShort(EE_EVENT_LOG_TAIL_INDEX_ADDRESS);
#ifdef DEBUG_LOG
logging.println("EEPROM was initialized for event logging");
logging.println("head: " + String(events.event_log_head_index) + ", tail: " + String(events.event_log_tail_index));
#endif
print_event_log();
}
for (uint16_t i = 0; i < EVENT_NOF_EVENTS; i++) {
events.entries[i].data = 0;
events.entries[i].timestamp = 0;
events.entries[i].millisrolloverCount = 0;
events.entries[i].occurences = 0;
events.entries[i].log = true;
events.entries[i].MQTTpublished = false; // Not published by default
}
events.entries[EVENT_CANMCP2517FD_INIT_FAILURE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CANMCP2515_INIT_FAILURE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CANFD_BUFFER_FULL].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CAN_OVERRUN].level = EVENT_LEVEL_INFO;
events.entries[EVENT_CANFD_RX_OVERRUN].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CAN_RX_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CAN2_RX_FAILURE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CANFD_RX_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CAN_RX_WARNING].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CAN_TX_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CAN_INVERTER_MISSING].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CONTACTOR_WELDED].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_WATER_INGRESS].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CHARGE_LIMIT_EXCEEDED].level = EVENT_LEVEL_INFO;
events.entries[EVENT_DISCHARGE_LIMIT_EXCEEDED].level = EVENT_LEVEL_INFO;
events.entries[EVENT_12V_LOW].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_SOC_PLAUSIBILITY_ERROR].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_SOC_UNAVAILABLE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_KWH_PLAUSIBILITY_ERROR].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BALANCING_START].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BALANCING_END].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BATTERY_EMPTY].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BATTERY_FULL].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BATTERY_FUSE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_BATTERY_FROZEN].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BATTERY_CAUTION].level = EVENT_LEVEL_INFO;
events.entries[EVENT_BATTERY_CHG_STOP_REQ].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_BATTERY_DISCHG_STOP_REQ].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_BATTERY_CHG_DISCHG_STOP_REQ].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_BATTERY_OVERHEAT].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_BATTERY_OVERVOLTAGE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_BATTERY_UNDERVOLTAGE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_BATTERY_VALUE_UNAVAILABLE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_BATTERY_ISOLATION].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_VOLTAGE_DIFFERENCE].level = EVENT_LEVEL_INFO;
events.entries[EVENT_SOH_DIFFERENCE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_SOH_LOW].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_HVIL_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_PRECHARGE_FAILURE].level = EVENT_LEVEL_INFO;
events.entries[EVENT_INTERNAL_OPEN_FAULT].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_INVERTER_OPEN_CONTACTOR].level = EVENT_LEVEL_INFO;
events.entries[EVENT_INTERFACE_MISSING].level = EVENT_LEVEL_INFO;
events.entries[EVENT_MODBUS_INVERTER_MISSING].level = EVENT_LEVEL_INFO;
events.entries[EVENT_ERROR_OPEN_CONTACTOR].level = EVENT_LEVEL_INFO;
events.entries[EVENT_CELL_CRITICAL_UNDER_VOLTAGE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CELL_CRITICAL_OVER_VOLTAGE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_CELL_UNDER_VOLTAGE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CELL_OVER_VOLTAGE].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_CELL_DEVIATION_HIGH].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_UNKNOWN_EVENT_SET].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_OTA_UPDATE].level = EVENT_LEVEL_UPDATE;
events.entries[EVENT_OTA_UPDATE_TIMEOUT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_DUMMY_INFO].level = EVENT_LEVEL_INFO;
events.entries[EVENT_DUMMY_DEBUG].level = EVENT_LEVEL_DEBUG;
events.entries[EVENT_DUMMY_WARNING].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_DUMMY_ERROR].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_PERSISTENT_SAVE_INFO].level = EVENT_LEVEL_INFO;
events.entries[EVENT_SERIAL_RX_WARNING].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_SERIAL_RX_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_SERIAL_TX_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_SERIAL_TRANSMITTER_FAILURE].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_EEPROM_WRITE].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_UNKNOWN].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_POWERON].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_EXT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_SW].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_PANIC].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_RESET_INT_WDT].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_RESET_TASK_WDT].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_RESET_WDT].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_RESET_DEEPSLEEP].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_BROWNOUT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_SDIO].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_USB].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_JTAG].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_EFUSE].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_PWR_GLITCH].level = EVENT_LEVEL_INFO;
events.entries[EVENT_RESET_CPU_LOCKUP].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_PAUSE_BEGIN].level = EVENT_LEVEL_WARNING;
events.entries[EVENT_PAUSE_END].level = EVENT_LEVEL_INFO;
events.entries[EVENT_WIFI_CONNECT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_WIFI_DISCONNECT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_MQTT_CONNECT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_MQTT_DISCONNECT].level = EVENT_LEVEL_INFO;
events.entries[EVENT_EQUIPMENT_STOP].level = EVENT_LEVEL_ERROR;
events.entries[EVENT_EEPROM_WRITE].log = false; // Don't log the logger...
// Write to EEPROM every X minutes (if an event has been set)
events.ee_timer.set_interval(EE_WRITE_PERIOD_MINUTES * 60 * 1000);
}
void set_event(EVENTS_ENUM_TYPE event, uint8_t data) {
set_event(event, data, false);
}
void set_event_latched(EVENTS_ENUM_TYPE event, uint8_t data) {
set_event(event, data, true);
}
void clear_event(EVENTS_ENUM_TYPE event) {
if (events.entries[event].state == EVENT_STATE_ACTIVE) {
events.entries[event].state = EVENT_STATE_INACTIVE;
update_event_level();
update_bms_status();
}
}
void reset_all_events() {
events.nof_logged_events = 0;
for (uint16_t i = 0; i < EVENT_NOF_EVENTS; i++) {
events.entries[i].data = 0;
events.entries[i].state = EVENT_STATE_INACTIVE;
events.entries[i].timestamp = 0;
events.entries[i].millisrolloverCount = 0;
events.entries[i].occurences = 0;
events.entries[i].log = true;
events.entries[i].MQTTpublished = false; // Not published by default
}
events.level = EVENT_LEVEL_INFO;
update_bms_status();
}
void set_event_MQTTpublished(EVENTS_ENUM_TYPE event) {
events.entries[event].MQTTpublished = true;
}
const char* get_event_message_string(EVENTS_ENUM_TYPE event) {
switch (event) {
case EVENT_CANMCP2517FD_INIT_FAILURE:
return "CAN-FD initialization failed. Check hardware or bitrate settings";
case EVENT_CANMCP2515_INIT_FAILURE:
return "CAN-MCP addon initialization failed. Check hardware";
case EVENT_CANFD_BUFFER_FULL:
return "CAN-FD buffer overflowed. Some CAN messages were not sent. Contact developers.";
case EVENT_CAN_OVERRUN:
return "CAN message failed to send within defined time. Contact developers, CPU load might be too high.";
case EVENT_CANFD_RX_OVERRUN:
return "CAN-FD failed to receive all messages from CAN bus. Contact developers, CPU load might be too high.";
case EVENT_CAN_RX_FAILURE:
return "No CAN communication detected for 60s. Shutting down battery control.";
case EVENT_CAN2_RX_FAILURE:
return "No CAN communication detected for 60s on CAN2. Shutting down the secondary battery control.";
case EVENT_CANFD_RX_FAILURE:
return "No CANFD communication detected for 60s. Shutting down battery control.";
case EVENT_CAN_RX_WARNING:
return "High amount of corrupted CAN messages detected. Check CAN wire shielding!";
case EVENT_CAN_TX_FAILURE:
return "CAN messages failed to transmit, or no one on the bus to ACK the message!";
case EVENT_CAN_INVERTER_MISSING:
return "Inverter not sending messages on CAN bus. Check wiring!";
case EVENT_CONTACTOR_WELDED:
return "Contactors sticking/welded. Inspect battery with caution!";
case EVENT_CHARGE_LIMIT_EXCEEDED:
return "Inverter is charging faster than battery is allowing.";
case EVENT_DISCHARGE_LIMIT_EXCEEDED:
return "Inverter is discharging faster than battery is allowing.";
case EVENT_WATER_INGRESS:
return "Water leakage inside battery detected. Operation halted. Inspect battery!";
case EVENT_12V_LOW:
return "12V battery source below required voltage to safely close contactors. Inspect the supply/battery!";
case EVENT_SOC_PLAUSIBILITY_ERROR:
return "SOC reported by battery not plausible. Restart battery!";
case EVENT_SOC_UNAVAILABLE:
return "SOC not sent by BMS. Calibrate BMS via app.";
case EVENT_KWH_PLAUSIBILITY_ERROR:
return "kWh remaining reported by battery not plausible. Battery needs cycling.";
case EVENT_BALANCING_START:
return "Balancing has started";
case EVENT_BALANCING_END:
return "Balancing has ended";
case EVENT_BATTERY_EMPTY:
return "Battery is completely discharged";
case EVENT_BATTERY_FULL:
return "Battery is fully charged";
case EVENT_BATTERY_FUSE:
return "Battery internal fuse blown. Inspect battery";
case EVENT_BATTERY_FROZEN:
return "Battery is too cold to operate optimally. Consider warming it up!";
case EVENT_BATTERY_CAUTION:
return "Battery has raised a general caution flag. Might want to inspect it closely.";
case EVENT_BATTERY_CHG_STOP_REQ:
return "Battery raised caution indicator AND requested charge stop. Inspect battery status!";
case EVENT_BATTERY_DISCHG_STOP_REQ:
return "Battery raised caution indicator AND requested discharge stop. Inspect battery status!";
case EVENT_BATTERY_CHG_DISCHG_STOP_REQ:
return "Battery raised caution indicator AND requested charge/discharge stop. Inspect battery status!";
case EVENT_BATTERY_REQUESTS_HEAT:
return "COLD BATTERY! Battery requesting heating pads to activate!";
case EVENT_BATTERY_WARMED_UP:
return "Battery requesting heating pads to stop. The battery is now warm enough.";
case EVENT_BATTERY_OVERHEAT:
return "Battery overheated. Shutting down to prevent thermal runaway!";
case EVENT_BATTERY_OVERVOLTAGE:
return "Battery exceeding maximum design voltage. Discharge battery to prevent damage!";
case EVENT_BATTERY_UNDERVOLTAGE:
return "Battery under minimum design voltage. Charge battery to prevent damage!";
case EVENT_BATTERY_VALUE_UNAVAILABLE:
return "Battery measurement unavailable. Check 12V power supply and battery wiring!";
case EVENT_BATTERY_ISOLATION:
return "Battery reports isolation error. High voltage might be leaking to ground. Check battery!";
case EVENT_VOLTAGE_DIFFERENCE:
return "Too large voltage diff between the batteries. Second battery cannot join the DC-link";
case EVENT_SOH_DIFFERENCE:
return "Large deviation in State of health between packs. Inspect battery.";
case EVENT_SOH_LOW:
return "State of health critically low. Battery internal resistance too high to continue. Recycle "
"battery.";
case EVENT_HVIL_FAILURE:
return "Battery interlock loop broken. Check that high voltage / low voltage connectors are seated. "
"Battery will be disabled!";
case EVENT_PRECHARGE_FAILURE:
return "Battery failed to precharge. Check that capacitor is seated on high voltage output.";
case EVENT_INTERNAL_OPEN_FAULT:
return "High voltage cable removed while battery running. Opening contactors!";
case EVENT_INVERTER_OPEN_CONTACTOR:
return "Inverter side opened contactors. Normal operation.";
case EVENT_INTERFACE_MISSING:
return "Configuration trying to use CAN interface not baked into the software. Recompile software!";
case EVENT_ERROR_OPEN_CONTACTOR:
return "Too much time spent in error state. Opening contactors, not safe to continue charging. "
"Check other error code for reason!";
case EVENT_MODBUS_INVERTER_MISSING:
return "Modbus inverter has not sent any data. Inspect communication wiring!";
case EVENT_CELL_CRITICAL_UNDER_VOLTAGE:
return "CELL VOLTAGE CRITICALLY LOW! Not possible to continue. Inspect battery!";
case EVENT_CELL_UNDER_VOLTAGE:
return "Cell undervoltage. Further discharge not possible. Check balancing of cells";
case EVENT_CELL_OVER_VOLTAGE:
return "Cell overvoltage. Further charging not possible. Check balancing of cells";
case EVENT_CELL_CRITICAL_OVER_VOLTAGE:
return "CELL VOLTAGE CRITICALLY HIGH! Not possible to continue. Inspect battery!";
case EVENT_CELL_DEVIATION_HIGH:
return "Large cell voltage deviation! Check balancing of cells";
case EVENT_UNKNOWN_EVENT_SET:
return "An unknown event was set! Review your code!";
case EVENT_DUMMY_INFO:
return "The dummy info event was set!"; // Don't change this event message!
case EVENT_DUMMY_DEBUG:
return "The dummy debug event was set!"; // Don't change this event message!
case EVENT_DUMMY_WARNING:
return "The dummy warning event was set!"; // Don't change this event message!
case EVENT_DUMMY_ERROR:
return "The dummy error event was set!"; // Don't change this event message!
case EVENT_PERSISTENT_SAVE_INFO:
return "Failed to save user settings. Namespace full?";
case EVENT_SERIAL_RX_WARNING:
return "Error in serial function: No data received for some time, see data for minutes";
case EVENT_SERIAL_RX_FAILURE:
return "Error in serial function: No data for a long time!";
case EVENT_SERIAL_TX_FAILURE:
return "Error in serial function: No ACK from receiver!";
case EVENT_SERIAL_TRANSMITTER_FAILURE:
return "Error in serial function: Some ERROR level fault in transmitter, received by receiver";
case EVENT_OTA_UPDATE:
return "OTA update started!";
case EVENT_OTA_UPDATE_TIMEOUT:
return "OTA update timed out!";
case EVENT_EEPROM_WRITE:
return "The EEPROM was written";
case EVENT_RESET_UNKNOWN:
return "The board was reset unexpectedly, and reason can't be determined";
case EVENT_RESET_POWERON:
return "The board was reset from a power-on event. Normal operation";
case EVENT_RESET_EXT:
return "The board was reset from an external pin";
case EVENT_RESET_SW:
return "The board was reset via software, webserver or OTA. Normal operation";
case EVENT_RESET_PANIC:
return "The board was reset due to an exception or panic. Inform developers!";
case EVENT_RESET_INT_WDT:
return "The board was reset due to an interrupt watchdog timeout. Inform developers!";
case EVENT_RESET_TASK_WDT:
return "The board was reset due to a task watchdog timeout. Inform developers!";
case EVENT_RESET_WDT:
return "The board was reset due to other watchdog timeout. Inform developers!";
case EVENT_RESET_DEEPSLEEP:
return "The board was reset after exiting deep sleep mode";
case EVENT_RESET_BROWNOUT:
return "The board was reset due to a momentary low voltage condition. This is expected during certain "
"operations like flashing via USB";
case EVENT_RESET_SDIO:
return "The board was reset over SDIO";
case EVENT_RESET_USB:
return "The board was reset by the USB peripheral";
case EVENT_RESET_JTAG:
return "The board was reset by JTAG";
case EVENT_RESET_EFUSE:
return "The board was reset due to an efuse error";
case EVENT_RESET_PWR_GLITCH:
return "The board was reset due to a detected power glitch";
case EVENT_RESET_CPU_LOCKUP:
return "The board was reset due to CPU lockup. Inform developers!";
case EVENT_PAUSE_BEGIN:
return "The emulator is trying to pause the battery.";
case EVENT_PAUSE_END:
return "The emulator is attempting to resume battery operation from pause.";
case EVENT_WIFI_CONNECT:
return "Wifi connected.";
case EVENT_WIFI_DISCONNECT:
return "Wifi disconnected.";
case EVENT_MQTT_CONNECT:
return "MQTT connected.";
case EVENT_MQTT_DISCONNECT:
return "MQTT disconnected.";
case EVENT_EQUIPMENT_STOP:
return "EQUIPMENT STOP ACTIVATED!!!";
default:
return "";
}
}
const char* get_event_enum_string(EVENTS_ENUM_TYPE event) {
// Return the event name but skip "EVENT_" that should always be first
return EVENTS_ENUM_TYPE_STRING[event] + 6;
}
const char* get_event_level_string(EVENTS_ENUM_TYPE event) {
// Return the event level but skip "EVENT_LEVEL_" that should always be first
return EVENTS_LEVEL_TYPE_STRING[events.entries[event].level] + 12;
}
const EVENTS_STRUCT_TYPE* get_event_pointer(EVENTS_ENUM_TYPE event) {
return &events.entries[event];
}
EVENTS_LEVEL_TYPE get_event_level(void) {
return events.level;
}
/* Local functions */
static void set_event(EVENTS_ENUM_TYPE event, uint8_t data, bool latched) {
// Just some defensive stuff if someone sets an unknown event
if (event >= EVENT_NOF_EVENTS) {
event = EVENT_UNKNOWN_EVENT_SET;
}
// If the event is already set, no reason to continue
if ((events.entries[event].state != EVENT_STATE_ACTIVE) &&
(events.entries[event].state != EVENT_STATE_ACTIVE_LATCHED)) {
events.entries[event].occurences++;
events.entries[event].MQTTpublished = false;
if (events.entries[event].log) {
log_event(event, events.entries[event].millisrolloverCount, events.entries[event].timestamp, data);
}
#ifdef DEBUG_LOG
logging.print("Event: ");
logging.println(get_event_message_string(event));
#endif
}
// We should set the event, update event info
events.entries[event].timestamp = millis();
events.entries[event].millisrolloverCount = millisrolloverCount;
events.entries[event].data = data;
// Check if the event is latching
events.entries[event].state = latched ? EVENT_STATE_ACTIVE_LATCHED : EVENT_STATE_ACTIVE;
// Update event level, only upwards. Downward changes are done in Software.ino:loop()
events.level = max(events.level, events.entries[event].level);
update_bms_status();
}
static void update_bms_status(void) {
switch (events.level) {
case EVENT_LEVEL_INFO:
case EVENT_LEVEL_WARNING:
case EVENT_LEVEL_DEBUG:
datalayer.battery.status.bms_status = ACTIVE;
break;
case EVENT_LEVEL_UPDATE:
datalayer.battery.status.bms_status = UPDATING;
break;
case EVENT_LEVEL_ERROR:
datalayer.battery.status.bms_status = FAULT;
break;
default:
break;
}
}
// Function to compare events by timestamp descending
bool compareEventsByTimestampDesc(const EventData& a, const EventData& b) {
if (a.event_pointer->millisrolloverCount != b.event_pointer->millisrolloverCount) {
return a.event_pointer->millisrolloverCount > b.event_pointer->millisrolloverCount;
}
return a.event_pointer->timestamp > b.event_pointer->timestamp;
}
// Function to compare events by timestamp ascending
bool compareEventsByTimestampAsc(const EventData& a, const EventData& b) {
if (a.event_pointer->millisrolloverCount != b.event_pointer->millisrolloverCount) {
return a.event_pointer->millisrolloverCount < b.event_pointer->millisrolloverCount;
}
return a.event_pointer->timestamp < b.event_pointer->timestamp;
}
static void update_event_level(void) {
EVENTS_LEVEL_TYPE temporary_level = EVENT_LEVEL_INFO;
for (uint8_t i = 0u; i < EVENT_NOF_EVENTS; i++) {
if ((events.entries[i].state == EVENT_STATE_ACTIVE) || (events.entries[i].state == EVENT_STATE_ACTIVE_LATCHED)) {
temporary_level = max(events.entries[i].level, temporary_level);
}
}
events.level = temporary_level;
}
static void log_event(EVENTS_ENUM_TYPE event, uint8_t millisrolloverCount, uint32_t timestamp, uint8_t data) {
// Update head with wrap to 0
if (++events.event_log_head_index == EE_NOF_EVENT_ENTRIES) {
events.event_log_head_index = 0;
}
// If the head now points to the tail, move the tail, with wrap to 0
if (events.event_log_head_index == events.event_log_tail_index) {
if (++events.event_log_tail_index == EE_NOF_EVENT_ENTRIES) {
events.event_log_tail_index = 0;
}
}
// The head now holds the index to the oldest event, the one we want to overwrite,
// so calculate the absolute address
int entry_address = EE_EVENT_ENTRY_START_ADDRESS + EE_EVENT_ENTRY_SIZE * events.event_log_head_index;
// Prepare an event block to write
EVENT_LOG_ENTRY_TYPE entry = {
.event = event, .millisrolloverCount = millisrolloverCount, .timestamp = timestamp, .data = data};
// Put the event in (what I guess is) the RAM EEPROM mirror, or write buffer
EEPROM.put(entry_address, entry);
// Store the new indices
EEPROM.writeUShort(EE_EVENT_LOG_HEAD_INDEX_ADDRESS, events.event_log_head_index);
EEPROM.writeUShort(EE_EVENT_LOG_TAIL_INDEX_ADDRESS, events.event_log_tail_index);
//logging.println("Wrote event " + String(event) + " to " + String(entry_address));
//logging.println("head: " + String(events.event_log_head_index) + ", tail: " + String(events.event_log_tail_index));
// We don't need the exact number, it's just for deciding to store or not
events.nof_logged_events += (events.nof_logged_events < 255) ? 1 : 0;
}
static void print_event_log(void) {
// If the head actually points to the tail, the log is probably blank
if (events.event_log_head_index == events.event_log_tail_index) {
#ifdef DEBUG_LOG
logging.println("No events in log");
#endif
return;
}
EVENT_LOG_ENTRY_TYPE entry;
for (int i = 0; i < EE_NOF_EVENT_ENTRIES; i++) {
// Start at the oldest event, work through the log all the way the the head
int index = ((events.event_log_tail_index + i) % EE_NOF_EVENT_ENTRIES);
int address = EE_EVENT_ENTRY_START_ADDRESS + EE_EVENT_ENTRY_SIZE * index;
EEPROM.get(address, entry);
if (entry.event == EVENT_NOF_EVENTS) {
// The entry is a blank that has been left behind somehow
continue;
}
#ifdef DEBUG_LOG
logging.println("Event: " + String(get_event_enum_string(entry.event)) + ", data: " + String(entry.data) +
", time: " + String(entry.timestamp));
#endif
if (index == events.event_log_head_index) {
break;
}
}
}
Reference in a new issue View git blame Copy permalink