mirror of
https://github.com/dalathegreat/Battery-Emulator.git
synced 2025-10-03 09:49:32 +02:00
42 lines
1.1 KiB
C
42 lines
1.1 KiB
C
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
// PIN mappings, do not change these unless you are adding on extra hardware to the PCB
|
|
#define PIN_5V_EN 16
|
|
#define CAN_TX_PIN 27
|
|
#define CAN_RX_PIN 26
|
|
#define CAN_SE_PIN 23
|
|
|
|
#define RS485_EN_PIN 17 // 17 /RE
|
|
#define RS485_TX_PIN 22 // 21
|
|
#define RS485_RX_PIN 21 // 22
|
|
#define RS485_SE_PIN 19 // 22 /SHDN
|
|
|
|
#ifdef DUAL_CAN
|
|
#define MCP2515_SCK 12 // SCK input of MCP2515
|
|
#define MCP2515_MOSI 5 // SDI input of MCP2515
|
|
#define MCP2515_MISO 34 // SDO output of MCP2515 | Pin 34 is input only, without pullup/down resistors
|
|
#define MCP2515_CS 18 // CS input of MCP2515
|
|
#define MCP2515_INT 35 // INT output of MCP2515 | | Pin 35 is input only, without pullup/down resistors
|
|
#endif
|
|
|
|
#ifdef CONTACTOR_CONTROL
|
|
#define POSITIVE_CONTACTOR_PIN 32
|
|
#define NEGATIVE_CONTACTOR_PIN 33
|
|
#define PRECHARGE_PIN 25
|
|
#endif
|
|
|
|
#define SD_MISO_PIN 2
|
|
#define SD_MOSI_PIN 15
|
|
#define SD_SCLK_PIN 14
|
|
#define SD_CS_PIN 13
|
|
#define WS2812_PIN 4
|
|
|
|
// LED definitions for the board
|
|
#define GREEN 0
|
|
#define YELLOW 1
|
|
#define RED 2
|
|
#define BLUE 3
|
|
#define TEST_ALL_COLORS 10
|
|
|
|
#endif
|