mirror of
https://github.com/dalathegreat/Battery-Emulator.git
synced 2025-10-06 03:50:13 +02:00
452a9ab439
- Added support for PWM on the contactors - Added contactor on/off conrol from the inverter - Moved #defines from Software.ino.ino to config.h to be able to use #ifdefs in SolAX-CAN.cpp Author identity unknown
48 lines
No EOL
2 KiB
C
48 lines
No EOL
2 KiB
C
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
/* Select battery used */
|
|
#define BATTERY_TYPE_LEAF // See NISSAN-LEAF-BATTERY.h for more LEAF battery settings
|
|
//#define TESLA_MODEL_3_BATTERY // See TESLA-MODEL-3-BATTERY.h for more Tesla battery settings
|
|
//#define RENAULT_ZOE_BATTERY // See RENAULT-ZOE-BATTERY.h for more Zoe battery settings
|
|
//#define IMIEV_ION_CZERO_BATTERY // See IMIEV-CZERO-ION-BATTERY.h for more triplet battery settings
|
|
//#define CHADEMO // See CHADEMO.h for more Chademo related settings
|
|
|
|
/* Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki */
|
|
//#define MODBUS_BYD //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
|
|
//#define CAN_BYD //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
|
|
#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
|
|
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
|
|
|
|
#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using MCP2515 controller (Needed for FoxESS inverts)
|
|
|
|
// PIN
|
|
#define PIN_5V_EN 16
|
|
|
|
#define CAN_TX_PIN 27
|
|
#define CAN_RX_PIN 26
|
|
#define CAN_SE_PIN 23
|
|
|
|
#define MCP2515_SCK 12 // SCK input of MCP2515
|
|
#define MCP2515_MOSI 5 // SDI input of MCP2515
|
|
#define MCP2515_MISO 34 // SDO output of MCP2515 | Pin 34 is input only, without pullup/down resistors
|
|
#define MCP2515_CS 18 // CS input of MCP2515
|
|
#define MCP2515_INT 35 // INT output of MCP2515 | | Pin 35 is input only, without pullup/down resistors
|
|
|
|
#define RS485_EN_PIN 17 // 17 /RE
|
|
#define RS485_TX_PIN 22 // 21
|
|
#define RS485_RX_PIN 21 // 22
|
|
#define RS485_SE_PIN 19 // 22 /SHDN
|
|
|
|
#define POSITIVE_CONTACTOR_PIN 32
|
|
#define NEGATIVE_CONTACTOR_PIN 33
|
|
#define PRECHARGE_PIN 25
|
|
|
|
#define SD_MISO_PIN 2
|
|
#define SD_MOSI_PIN 15
|
|
#define SD_SCLK_PIN 14
|
|
#define SD_CS_PIN 13
|
|
|
|
#define WS2812_PIN 4
|
|
|
|
#endif |