mirror of
https://github.com/dalathegreat/Battery-Emulator.git
synced 2025-10-03 09:49:32 +02:00
34 lines
2.1 KiB
C++
34 lines
2.1 KiB
C++
#include "USER_SETTINGS.h"
|
|
|
|
/* This file contains all the battery settings and limits */
|
|
/* They can be defined here, or later on in the WebUI */
|
|
|
|
/* Battery settings */
|
|
volatile uint16_t BATTERY_WH_MAX =
|
|
30000; //Battery size in Wh (Maximum value for most inverters is 65000 [65kWh], you can use larger batteries but do not set value over 65000!
|
|
volatile uint16_t MAXPERCENTAGE =
|
|
800; //80.0% , Max percentage the battery will charge to (App will show 100% once this value is reached)
|
|
volatile uint16_t MINPERCENTAGE =
|
|
200; //20.0% , Min percentage the battery will discharge to (App will show 0% once this value is reached)
|
|
volatile uint16_t MAXCHARGEAMP =
|
|
300; //30.0A , BYD CAN specific setting, Max charge speed in Amp (Some inverters needs to be artificially limited)
|
|
volatile uint16_t MAXDISCHARGEAMP =
|
|
300; //30.0A , BYD CAN specific setting, Max discharge speed in Amp (Some inverters needs to be artificially limited)
|
|
|
|
/* Charger settings (Optional, when generator charging) */
|
|
volatile float CHARGER_SET_HV = 384; // Reasonably appropriate 4.0v per cell charging of a 96s pack
|
|
volatile float CHARGER_MAX_HV = 420; // Max permissible output (VDC) of charger
|
|
volatile float CHARGER_MIN_HV = 200; // Min permissible output (VDC) of charger
|
|
volatile float CHARGER_MAX_POWER = 3300; // Max power capable of charger, as a ceiling for validating config
|
|
volatile float CHARGER_MAX_A = 11.5; // Max current output (amps) of charger
|
|
volatile float CHARGER_END_A = 1.0; // Current at which charging is considered complete
|
|
|
|
#ifdef WEBSERVER
|
|
volatile uint8_t AccessPointEnabled =
|
|
true; //Set to either true or false incase you want the board to enable a direct wifi access point
|
|
const char* ssid = "REPLACE_WITH_YOUR_SSID"; // Maximum of 63 characters;
|
|
const char* password = "REPLACE_WITH_YOUR_PASSWORD"; // Minimum of 8 characters;
|
|
const char* ssidAP = "Battery Emulator"; // Maximum of 63 characters;
|
|
const char* passwordAP = "123456789"; // Minimum of 8 characters; set to NULL if you want the access point to be open
|
|
const char* versionNumber = "4.4.0"; // The current software version, shown on webserver
|
|
#endif
|