doc

src/windows/00-WINDOWS-BUILD.txt

@@ -1,72 +0,0 @@
-= Building Recoll on Windows
-
-The port of Recoll to Windows was begun using Microsoft VS 2015, and
-there are functional project files for recollindex and recollq in this
-directory.
-
-However, no version of Qt supporting VS 2015 was available when needed
-(10-2015), so that the port was completed using the MinGW version of Qt.
-
-At this point it is easiest to use MinGW for everything.
-
-Both the GUI and the non-GUI parts (library, recollindex, recollq) are
-built using Qt qmake/qcreator projects:
-
-  windows/qmkrecoll/librecoll.pro
-  windows/qmkrecoll/recollq.pro
-  windows/qmkrecoll/recollindex.pro
-  qtgui/recoll.pro
-
-Only the names of the intermediary files (xapian and recoll libs) should
-need adjustment in the project files. Just open librecoll.pro in qtcreator,
-build it, see where it puts the lib, and adjust the other files.
-
-== Walkthrough
-
-Here follows a tentative recipee for building recoll on windows 7. This was
-reconstructed after actually doing it, and not tried again on a pristine
-system, so there may be things missing
-
- - Install Qt 5.x, use the MinGW binary version
-
- - Install the current version of MinGW, possibly check compatibility with
-   the one which comes with Qt (versions not too far away). The reason for
-   doing this is that the Qt copy does not come with msys, which is
-   convenient for working with non-qmake projects (zlib and Xapian).
-
- - Start a command window with the appropriate MinGW/Msys environment (use
-   MinGW/msys/x.x/msys.bat). All the following is done from the msys window
-   (so that commands like tar etc. are available). Except for the
-   qt-creator parts of course.
-
- - Extract zlib (use a tar distrib and msys tar).
- - From the top of the extracted zlib tree, as from instructions inside
-   Makefile.gcc: 
-        make -fwin32/Makefile.gcc
-        make test testdll -fwin32/Makefile.gcc
-
- - Extract xapian
- - Configure with:
-     LDFLAGS=-Lc:/recolldeps/zlib-1.2.8 \
-     CPPFLAGS=-Ic:/recolldeps/zlib-1.2.8 \
-     ./configure
-    (Change according to where you built zlib, of course).
- - make
- - This will produce .libs/libxapian-22.dll which I just used in the recoll
-   .pro files and also copied into the install bin directory.
-
- - Then update the .pro files with the Xapian location (includes and lib)
- - Build librecoll.pro
- - Update the other project files with the librecoll location
- - Build them
- - Update the windows/mkinstdir.sh with the actual locations of the libs etc.
-
-Curiously, there does not seem to be a need to copy zlib1.dll to the
-install dir ???
-
-Then build unrtf and antiword (or get them from somewhere...). Update, then
-finally run mkinstdir.sh
-
-You should have a working recoll installation.
-
-

website/pages/Makefile

@@ -3,7 +3,7 @@
 .txt.html:
 	asciidoc $<
 
-all: recoll-mingw.html
+all: recoll-mingw.html recoll-windows.html
 
 clean:
 	rm -f *.html

website/pages/recoll-mingw.txt

@@ -1,4 +1,4 @@
-= Building Recoll on Microsoft Windows MinGW
+= Building Recoll on Microsoft Windows with MinGW
 
 This document describes building a Recoll distribution, starting from a
 pristine Windows machine, using the http://www.mingw.org/[MinGW] port of gcc
@@ -15,11 +15,11 @@ In the following, a number of commands will use a command window with an
 MinGW environment. This can be easily created by executing
 C:\MinGW\msys\1.0\msys.bat from File Explorer.
 
-Note: you should take care to use the gcc compiler which comes with Qt for
+NOTE: you should take care to use the gcc compiler which comes with Qt for
 all the following builds. For this, you will want to execute the following
 command in the command window:
 
-    export PATH=c:/qt/tools/mingw492_32/bin:$PATH
+    export PATH=/c/qt/tools/mingw492_32/bin:$PATH
 
 == Tortoise HG
 
@@ -49,10 +49,14 @@ script (using `windeployqt`)
 == zlib
 
 Download from http://zlib.net/zlib-1.2.8.tar.gz
+
+Don't forget the PATH update if not done yet:
+
+     export PATH=/c/qt/tools/mingw492_32/bin:$PATH
+
 Then, from an MSYS command window (see above):
 
      cd c:/temp
-     export PATH=c:/qt/tools/mingw492_32/bin:$PATH
      tar xzf path-to-tar-file
      cd zlib-1.2.8
      make -f win32/Makefile.gcc
@@ -62,6 +66,12 @@ Then, from an MSYS command window (see above):
 Download from:
 http://oligarchy.co.uk/xapian/1.2.21/xapian-core-1.2.21.tar.xz
 
+Don't forget the PATH update if not done yet:
+
+     export PATH=/c/qt/tools/mingw492_32/bin:$PATH
+
+Then:
+
     cd c:/recolldeps
     tar xf path-to-tar-file
     cd xapian-core-1.2.21
@@ -73,8 +83,7 @@ http://oligarchy.co.uk/xapian/1.2.21/xapian-core-1.2.21.tar.xz
 
 Then: 
 
-    export PATH=c:/qt/tools/mingw492_32/bin:$PATH
+    CPPFLAGS=-I/c/temp/zlib-1.2.8 LDFLAGS=-L/c/temp/zlib-1.2.8 ./configure
-    CPPFLAGS=-IC:/temp/zlib-1.2.8 LDFLAGS=-Lc:/temp/zlib-1.2.8 ./configure
     make
 
 == Recoll
@@ -85,13 +94,14 @@ supporting Windows at the moment.
 - If not already done, clone the recoll repository from:
   https://medoc@bitbucket.org/medoc/recoll to `C:/recoll`
 
-- Start qtcreator and open c:/recoll/src/windows/qmkrecoll/librecoll.pro At
+- Start `QtCreator` and open
-  the bottom of the file, you may need to fix the locations for the xapian
+  `c:/recoll/src/windows/qmkrecoll/librecoll.pro`. At the bottom of the
-  and zlib dlls.
+  file, you may need to fix the locations for the xapian and zlib dlls.
 
 - Build librecoll.pro
 
 - Do the same (adjust locations and build) for:
+
   c:/recoll/src/windows/qmkrecoll/rclstartw.pro
   c:/recoll/src/windows/qmkrecoll/recollindex.pro
   c:/recoll/src/windows/qmkrecoll/recollq.pro
@@ -114,7 +124,7 @@ http://www.7-zip.org/
 == Python
 
 All Recoll helper scripts (data extractors) are written in Python, and not
-yet compatible with Python3. You need to install and download Python 2.7
+yet compatible with Python3. You need to download and install Python 2.7
 from https://www.python.org/downloads/release/python-2710/
 
 == Python modules
@@ -138,43 +148,48 @@ This will be copied into the installation by the mkinstdir.sh script.
 === mutagen 
 
 Download and extract mutagen from https://pypi.python.org/pypi/mutagen
-Then in the mutagen directory (e.g. C:/temp/mutagen-1.31):
+Then in the mutagen directory (e.g. C:/temp/mutagen-1.31 where it is
+expected by `mkinstdir.sh`):
 
      python setup.py build
 
-=== pyexiv2
+The module will be copied by mkinstdir.sh
-
-I did not attempt a build (needs boost-python, scons).
-Used an installer from http://tilloy.net/dev/pyexiv2/download.html
-
-The resulting site-packages data is stored in the recoll-windows-deps
-directory and copied into the filters directory by the mkinstdir.sh script
 
 === epub 
 
 Download from: http://pypi.python.org/pypi/epub/
 
 Extract, then execute the following in the extracted directory (e.g.:
-C:/temp/epub-0.5.2):
+`C:/temp/epub-0.5.2` which is expected by `mkinstdir.sh`):
  
    python setup.py
 
 The module will be copied by mkinstdir.sh
 
+=== pyexiv2
+
+I did not attempt a build (needs boost-python, scons).
+Used an installer from http://tilloy.net/dev/pyexiv2/download.html
+
+The resulting site-packages data is stored in the recolldeps
+repository and copied into the filters directory by the mkinstdir.sh
+script. 
+
 
 == Non-Python helpers
 
 == unrtf 
 
-I initially built unrtf with VS 2015, and I was too lazy to do it again
+The current unrtf sources can be built with MinGW.
-with mingw. The project files are in the Windows directory in the official
+
-repository: 
-            
     hg clone http://hg.savannah.gnu.org/hgweb/unrtf/
 
+    cd c:/unrtf/Windows
+    make -f Makefile.mingw
+
 == antiword
 
-Use the source from recoll-windows-deps (C:/recolldeps/unrtf)
+Use the source from recoll-windows-deps (C:/recolldeps/antiword)
 
      make -f Makefile.mingw.
 
@@ -188,7 +203,5 @@ the mkinstdir.sh script.
 
 == Building the install directory
 
-
 Once the builds above are performed, edit the mkinstdir.sh script to adjust
 the locations, and use it to build the installation directory
-

website/pages/recoll-windows.txt

@@ -0,0 +1,63 @@
+= Trying out Recoll on Windows
+
+The Windows port of Recoll has reached a point where it can be tested. At
+least, it will not break your system, and it does not crash too often.
+
+It was only built and tried on Windows 7.
+
+We would be very eager to get some feedback from some actual Windows user
+(I am only a visitor to Windows...). Is this useful at all ? What would 
+make more useful ? 
+
+There is no installer for the moment, the program and its auxiliary files
+are stored in a Zip file. This is quite big, because it contains a good
+part of the Qt 5.5.0 dlls (I can't produce a static build because of WebKit).
+
+The Zip creates a `recoll` directory. As far as I know, there is no
+assumption where it should reside, I use `c:/recoll`, but anywhere
+else should be ok.
+
+http://www.lesbonscomptes.com/recoll/windows/[Download directory]
+
+Besides extracting the Zip, you need to:
+
+ - Download and install Python 2.7 from
+   https://www.python.org/downloads/release/python-2710/. Most Recoll data
+   extraction filters have at least a Python part, so you will not be able
+   to do much without this.
+ - Download and install the 7-zip program from http://www.7-zip.org/. This
+   is only useful if you need to index compressed files.
+
+ - Update your PATH variable with the locations of the `python` and `7z`
+   executables.
+
+   * From Windows Explorer, click `Computer` in the left pane, then 
+     `System Properties` from the top, then `Avanced System Settings` from
+     the left pane, then `Environment Variables` at the bottom of the
+     popup. 
+   * Check that the locations for `python` (`C:\Python27`), and `7z`
+     (`C:\Program Files\7-Zip`) are either in the User or System PATH
+     variable. If they are not in there already , update or create the user
+     PATH and add them as: `C:\Python27;C:\Program Files\7-Zip` (use a
+     semi-colon as separator).
+
+
+Know problems:
+
+ - The default result list font is particularly ugly. Change it from 
+   `Preferences->GUI Configuration->Result List->Result List Font`
+
+ - The GUI sometimes crashes when you click `Preview` or `Open`. This does
+   not occur often, and usually for one of the first tries after starting
+   the program. Don't despair.
+
+ - There is no real-time or scheduled indexing as on Linux. For now, you
+   create and update the index by using the `File` menu (or executing
+   `recollindex.exe` from a command window).
+
+ - I'm quite convinced that there are still problems with file path case
+   insensitivity. The best approach when setting up the config is
+   to use the exact case for now.
+
+ - I'll add the others here as they are found ...
+