yetangitu/Battery-Emulator
1
0
Fork 0
mirror of https://github.com/dalathegreat/Battery-Emulator.git synced 2025-10-06 03:50:13 +02:00
Code Issues Projects Releases Packages Wiki Activity

Default cleanup

Browse source
This commit is contained in:
Cabooman 2024-02-02 18:01:31 +01:00
parent 27584eca9f
commit 7ad74adc2c
1 changed files with 6 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

12
Software/USER_SETTINGS.h
View file

@ -12,7 +12,7 @@
//#define CHADEMO_BATTERY
//#define IMIEV_CZERO_ION_BATTERY
//#define KIA_HYUNDAI_64_BATTERY
#define NISSAN_LEAF_BATTERY
//#define NISSAN_LEAF_BATTERY
//#define RENAULT_KANGOO_BATTERY
//#define RENAULT_ZOE_BATTERY
//#define SANTA_FE_PHEV_BATTERY
@ -21,7 +21,7 @@
/* Select inverter communication protocol. See Wiki for which to use with your inverter: https://github.com/dalathegreat/BYD-Battery-Emulator-For-Gen24/wiki */
//#define BYD_CAN //Enable this line to emulate a "BYD Battery-Box Premium HVS" over CAN Bus
#define BYD_MODBUS //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
//#define BYD_MODBUS //Enable this line to emulate a "BYD 11kWh HVM battery" over Modbus RTU
//#define LUNA2000_MODBUS //Enable this line to emulate a "Luna2000 battery" over Modbus RTU
//#define PYLON_CAN //Enable this line to emulate a "Pylontech battery" over CAN bus
//#define SMA_CAN //Enable this line to emulate a "BYD Battery-Box H 8.9kWh, 7 mod" over CAN bus
@ -29,15 +29,15 @@
//#define SOLAX_CAN //Enable this line to emulate a "SolaX Triple Power LFP" over CAN bus
/* Other options */
#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs
#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define DEBUG_VIA_USB //Enable this line to have the USB port output serial diagnostic data while program runs
//#define INTERLOCK_REQUIRED //Nissan LEAF specific setting, if enabled requires both high voltage conenctors to be seated before starting
//#define CONTACTOR_CONTROL //Enable this line to have pins 25,32,33 handle automatic precharge/contactor+/contactor- closing sequence
//#define PWM_CONTACTOR_CONTROL //Enable this line to use PWM logic for contactors, which lower power consumption and heat generation
//#define DUAL_CAN //Enable this line to activate an isolated secondary CAN Bus using add-on MCP2515 controller (Needed for FoxESS inverters)
//#define SERIAL_LINK_RECEIVER //Enable this line to receive battery data over RS485 pins from another Lilygo (This LilyGo interfaces with inverter)
//#define SERIAL_LINK_TRANSMITTER //Enable this line to send battery data over RS485 pins to another Lilygo (This LilyGo interfaces with battery)
#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
#define MQTT // Enable this line to enable MQTT
//#define WEBSERVER //Enable this line to enable WiFi, and to run the webserver. See USER_SETTINGS.cpp for the Wifi settings.
//#define MQTT // Enable this line to enable MQTT
/* Battery limits: These are set in the USER_SETTINGS.cpp file, or later on via the Webserver */
extern volatile uint16_t BATTERY_WH_MAX;