Explicit event initialization, local unit test execution

CMakeLists.txt

@@ -1,5 +1,9 @@
 cmake_minimum_required(VERSION 3.10)
 
+# Set the C++ standard to C++20
+set(CMAKE_CXX_STANDARD 20)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
 project(BatteryEmulator)
 
 # add_subdirectory(Software/src/devboard/utils)

Software/Software.ino

@@ -555,7 +555,7 @@ void handle_LED_state() {
   } else if (!rampUp && brightness == 0) {
     rampUp = true;
   }
-  switch (get_event_ledcolor()) {
+  switch (LEDcolor) {
     case GREEN:
       pixels.setPixelColor(0, pixels.Color(0, brightness, 0));  // Green pulsing LED
       break;

Software/src/devboard/utils/events.cpp

@@ -49,19 +49,45 @@ void run_event_handling(void) {
 
 /* Initialization function */
 void init_events(void) {
-  for (uint8_t i = 0; i < EVENT_NOF_EVENTS; i++) {
-    events.entries[i].timestamp = 0;
-    events.entries[i].data = 0;
-    events.entries[i].occurences = 0;
-    events.entries[i].led_color = RED;  // Most events are RED
-    events.entries[i].state = EVENT_STATE_INACTIVE;
-  }
 
-  // YELLOW events below
+  events.entries[EVENT_CAN_FAILURE] = {
-  events.entries[EVENT_12V_LOW].led_color = YELLOW;
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
-  events.entries[EVENT_CAN_WARNING].led_color = YELLOW;
+  events.entries[EVENT_CAN_WARNING] = {
-  events.entries[EVENT_CELL_DEVIATION_HIGH].led_color = YELLOW;
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = YELLOW, .state = EVENT_STATE_INACTIVE};
-  events.entries[EVENT_KWH_PLAUSIBILITY_ERROR].led_color = YELLOW;
+  events.entries[EVENT_WATER_INGRESS] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_12V_LOW] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = YELLOW, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_SOC_PLAUSIBILITY_ERROR] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_KWH_PLAUSIBILITY_ERROR] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = YELLOW, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_BATTERY_CHG_STOP_REQ] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_BATTERY_DISCHG_STOP_REQ] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_BATTERY_CHG_DISCHG_STOP_REQ] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_LOW_SOH] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_HVIL_FAILURE] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_INTERNAL_OPEN_FAULT] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_CELL_UNDER_VOLTAGE] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_CELL_OVER_VOLTAGE] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_CELL_DEVIATION_HIGH] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = YELLOW, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_UNKNOWN_EVENT_SET] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_OTA_UPDATE] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = BLUE, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_DUMMY] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
+  events.entries[EVENT_NOF_EVENTS] = {
+      .timestamp = 0, .data = 0, .occurences = 0, .led_color = RED, .state = EVENT_STATE_INACTIVE};
 
   // BLUE...
   events.entries[EVENT_OTA_UPDATE].led_color = BLUE;

cmake_clean.bat

@@ -0,0 +1,15 @@
+@echo off
+echo Cleaning up
+rmdir /Q/S build
+echo Creating new CMake build folder
+mkdir build
+cd build
+echo Building CMake project
+call cmake ..
+call cmake --build .
+echo Executing tests
+for %%i in ("test\Debug\*.exe") do (
+    echo Running %%i
+    %%i
+)
+cd..

test/utils/events_test.cpp

@@ -2,8 +2,8 @@
 #include "../test_lib.h"
 
 #include "../../Software/src/devboard/config.h"
-#include "events.cpp"
+#include "../../Software/src/devboard/utils/events.cpp"
-#include "timer.cpp"
+#include "../../Software/src/devboard/utils/timer.cpp"
 
 /* Local rest variables */
 bool elapsed = false;
@@ -20,6 +20,8 @@ TEST(init_events_test) {
 
   for (uint8_t i = 0; i < EVENT_NOF_EVENTS; i++) {
     ASSERT_EQ(events.entries[i].occurences, 0);
+    ASSERT_EQ(events.entries[i].data, 0);
+    ASSERT_EQ(events.entries[i].timestamp, 0);
   }
 }